Unscrewing The Transportation Legs; Assembly Of Support Legs And Screw Legs; Model-Related Assembly Of Legs Of Various Lengths - W.Schillig Quadroo 17350 Assembly

Before you can mount the original legs, the transportation legs must be screwed out.
▻ F ig. 1
Assembl y of he ight adju st abl e s u p p o r t l e g s :
Because of stability reasons there are height adjustable support legs enclosed
for some of the furniture. After screwing in the support legs onto the bottom and
in the middle of the furniture and positioning them carefully, you will be able to
control the height of the support legs. The support leg has to be adjustet on fl oor
level. ▻ Fig. 2
Assembl y of s C r e w l e g s :
After unscrewing the transportation legs, you can carefully screw in the enclosed original legs
into the thread of the same drill holes. ▻ Fig. 3
In order to offset any unevenness in the fl oor, spacing washers are enclosed. You should
secure these together with the legs of the furniture.
Mod el - r e l ate d asse mbly of L E G S of va r i o u s l e n g t H s :
In respect of upholstered furniture with legs of various lengths, you must ensure
that the longest legs are at the front and the shortest legs at the back.
▻ Fig. 4 Examples of positioning
It is recommended that felt pads will be affi xed in respect of sensitive fl oors.
4
–9 –
1
2
3
larg e so fa larg e s o fa
Support leg
Low leg
High leg