Assembly Of Wood Or Metal Legs - W.Schillig Quadroo 17350 Assembly

Assem bl y of wo o d o r m e ta l l e g s :
After unscrewing the transportation legs, you can attach the wood or metal legs with
the hexagonal head screws at the same position. Screw them in carefully. The assembly
intended drill-holes vary depending on the type of the leg.
Washers are also delivered for certain versions, please use them as well – as shown in the
examples below.
In addition, some legs must be fi xed with Spax screws to avoid the legs from twisting.
Before screwing in the Spax screws, ensure that the leg is correctly aligned (No predefi ned
hole.)
Examples of legs:
Spax screw
hexagonal head screw
It is recommended that felt pads will be affi xed in respect of sensitive fl oors.
–11 –