Where To Find More Information - Allied Telesis AT-AR020 PRI E1/T1 Quick Install Manual

10
Figure 1-1: Example output of firmware download process
Manager> set voip boot=c-1-0-0.bin server=10.32.16.115
Info (1110003): Operation successful.
Manager> set voip fi=hs-1-0-0.bin protocol=h323
Info (1110003): Operation successful.
Manager> set voip public int=eth0
Info (1110003): Operation successful.
Manager> ena voip protocol=h323
Info (1110282): VoIP PIC BAY0:Firmware is loading...
Info (1110282): VoIP PIC BAY1:Firmware is loading...
Manager>
Info (1110293): VoIP PIC BAY0:Firmware successfully loaded.
Manager>
Info (1110293): VoIP PIC BAY0:Firmware is now running.
Manager>
Info (1110293): VoIP PIC BAY1:Firmware successfully loaded.
Manager>
Info (1110293): VoIP PIC BAY1:Firmware is now running.

Where To Find More Information

Sources of further information:
■
The Port Interface Card Hardware Reference, which provides detailed
information on PICs. This Reference can be found on the CD-ROM
bundled with recently purchased switches or routers, or at
www.alliedtelesyn.co.nz/support/support.html.
■
The installation guide or reference manual for your switch or router, which
provides detailed information on the operational requirements of each
switch, router, or network configuration.
■
www.alliedtelesyn.co.nz.
Port Interface Card
C613-04020-01 REV H