Table of Contents
Advertisement
OBSERVATOR
Instruments
1.2 Versions
The OMC-045-II is available as standard unit for DIN rail mounting, or enclosed in a box. The following
versions are available
type
OMC-045-II-DIN
OMC-045-II-Rain
OMC-045-II-Lithium
OMC-045-II-Shoebox
The electronics for all these versions is the same. This manual applies to all versions. Only
electromechanical [aspects] vary, as well as hardware settings.
1.2.1
What's in the box?
An OMC-045-II datalogger.
USB A-mini B cable 3 m
See Chapter 6, for more information.
1.2.2
OMC-045-II-DIN
Always mount in a dry environment (RH<90%)
1.2.3
OMC-045-II-Rain
A small bag of silica gel is present, do not remove.
Close the box with the 4 screws carefully, so no moisture comes inside.
1.2.4
OMC-045-II-Lithium
A small bag of silica gel is present, do not remove.
Close the box with the 4 screws carefully, so no moisture comes inside
1.2.5
OMC-045-II-Shoebox
No need to open the box.
A small bag of silica gel is present, do not remove.
Close the box with the 4 screws carefully, so no moisture comes inside
description
Version for EN-55022 rail mounting
Version enclosed in IP-65 box with 3.6V
Lithium battery
Version enclosed in IP65 box 210x55x75mm,
with 14.4V Lithium battery pack enclosed
Version enclosed in an IP65 polyester box for
outdoor use, with enclosed rechargeable
VRLA battery 12V/7Ah
Technical User Manual
OMC-045-II
remarks
Standard
Fits in OMC-210
rain gauge
Not
rechargeable
blad 8 van 57
Advertisement
Table of Contents
Need help?
Do you have a question about the OMC-045-II and is the answer not in the manual?