Preface - Observator Instruments OMC-045-II Technical User's Manual

OBSERVATOR
Instruments

Preface

The OMC-045-II is used for collecting data and processing it. The data can be send through GPRS. For
this function you need a SIM card.
Important:

Disable the PIN code (use a mobile phone to check / disable the code)

Check the settings of the mobile provider

Check the settings for the communication with the FTP/Mail server

Check if the mobile provider accepts FTP/Mail communication
.
Mechanical changes to the OMC-045-II, has to be preformed inside a protected surrounding. Contact with
high air humidity, sweet and salt water has to be avoided
Warning ESD: By ignoring the ESD instructions, you can damage the OMC-045-II. This can create
indefinable behavior. This is difficult or impossible to repair.
The OMC-045-II has to be assembled inside a cabin on a DIN rail. In case this cabin is located outside, it
has to be IP65. For (near) sea / offshore locations, it must be IP66!
It is required to have knowledge of the sensors you would like to connect, since you have to configure
them via OMC-programmer.
Examples can be found in the appendix.
Technical User Manual
OMC-045-II
blad 6 van 57