adafruit learning system Trinket Introduction Manual page 32

Then paste in the following in the spot where you just deleted!
part
id = "t85";
desc = "ATtiny85";
has_debugwire = yes;
flash_instr = 0xB4, 0x02, 0x12;
eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D,
0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC,
0x99, 0xE1, 0xBB, 0xAC;
## no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
## avr910_devcode = ?;
## Try the AT90S2313 devcode:
avr910_devcode = 0x20;
signature = 0x1e 0x93
reset = io;
chip_erase_delay = 900000;
pgm_enable =
© Adafruit
Industries
0x0b;
"1 0 1 0 1 1 0 0 0 1 0 1 0 0 1
https://learn.adafruit.com/introducing-trinket
1",
Page 32 of 48