Table of Contents
Advertisement
Download the ld for your operating system and replace the one you have now
TCWorld for this fix!
Now restart the Arduino IDE. You are done with setup! Now it's time to say "hello, world" to
your new Trinket with the basic Blink sketch.
Blink!
OK let's practice uploading a sketch by uploading the classic Blink sketch. This program with
blink the onboard red LED that is connected to pin #1. Create a new sketch and copy&paste
© Adafruit
Industries
(http://adafru.it/cGP))
Download the new ld for
Windows
http://adafru.it/cGQ
Download the new ld for Mac
http://adafru.it/cGR
https://learn.adafruit.com/introducing-trinket
(thanks to
Page 20 of 48
Advertisement
Table of Contents
Need help?
Do you have a question about the Trinket and is the answer not in the manual?