Model Setup - Magom 330D Manual

330D – TURNIGY 9X SETUP

MODEL SETUP

•MIXER
CH1
CH2
CH3
CH4
CH5
CH6
[Now select the channel with Menu and select INSERT to add a new mix]
CH7
CH8
CH9
CH10
•LIMITS
SUBTRIM / EPA / REVERSE
TIPS:
A. To insert a channel configuration:
Place the pointer on the channel line and hold „MENU‟ button. Now you can change values
1.
using „PLUS‟ and „MINUS‟ buttons. Click „EXTI‟ when you finish setting up that channel.
B. To erase a channel configuration:
1. Place the pointer on the channel you want to erase.
2. Select the whole channel by clicking on „MENU‟ button.
3. Hold „EXIT‟ button to erase the channel.
C. To insert the first mixing in a channel:
1. Place the pointer on the channel line you want to insert the first mixing.
2. Select the whole channel by clicking on „MENU‟ button.
3. Hold „DN‟ button to copy the channel.
4. Accept the copy clicking on „MENU‟.
5. Now you can enter the mixing configuration following „A‟ step.
D. To insert following mixings in a channel:
A. Copy the first mixing instead of the channel following step „C‟.
Please note that this product is not a toy and not suitable for youngters under the age of 16. Technical details may be
subject to changes and modifications. All images and designs are property of MAGOM HRC. For any doubts or
questions, please contact us throught www.magomhrc.com.
To enter model setup:
-Turn on the transmitter.
-Touch one of the sticks in any direction.
-Hold „MINUS‟ button to enter MODEL SETUP.
„MIXER
‟‟ screen using „PLUS‟ and „MINUS‟ buttons.
-Go to
Ail 100
Ele 100
Thr 100
Rud 100
Ail 100
P3 100
+=Ail +60
+=Ele +60
+=Thr +60
P1 100
+=Ele 100
P2 100
+=Thr 100
P2 100
Ail 100
+=Ele 100
+=Thr 100
+=Rud 100
[*********Each line stranting with „+=‟ is a mixing**********]
[*********Use TIPs „C‟ and „D‟ to insert the mixings**********]
www.magomhrc.com
!ID1
!ID1
!ID1
ID1
|X| ID2
|X| ID2
|X| ID2
!ID1
ID1
!ID1
ID1
ID1
!ID1
2063-XXX
6