Magom 330D Manual page 5

330D - TURNIGY 9X SETUP
CAUTION !
PLEASE READ THIS BEFORE START
This manual is for full metal
This manual is for
This is a hobby product and some experience is required.
If you want to touch something without any knowledge, contact with our team before.
GENERAL SETUP AND CHANNEL MAPPING
To enter general setup:
+
- Push (plus) button more than 1 sec.
- Go to the end of page 1
have Mode 2.
Channel mapping
CH1 Factory (Mode 2)
CH2 Factory (Mode 2)
CH3 Factory (Mode 2)
CH4 Factory (Mode 2)
CH5 NULL
CH6 PIT TRIM
CH7 HOV THR
CH8 HOV PIT
In the next sheet we will explain how to map
the with the knobs.
Please note that this product is not a toy and not suitable for youngters under the age of 16. Technical details may
be subject to changes and modifications. All images and designs are property of MAGOM HRC. For any doubts or
questions, please contact us throught www.magomhrc.com.
330D excavator
Turnigy 9X transmitter with OPEN TX firmware.
and check you
.
CH 6
CH 1
CH 2
CH 3
CH 4
www.magomhrc.com
2063-XXX
CH 7
CH 8
5