Magom 330D Manual page 23

3-WAY VALVE M5 V2 – 330D
SPECS
• 3-way hydraulic valve (to control THREE movements).
• Pressure: Up to 30 bars.
• Recommended working pressure is 5-18 bars.
REQUIRED:
• 3 x std-servo. We recommend Futaba S-3003 (6003-002).
• Hydraulic oil. We recommend MAGOM HRC hydraulic oil (5050-001).
SCHEMA
Working angle is
about 60º, same as
servo angle.
At the neutral point, the valve is closed.
SERVO ASSEMBLY
STEP 1
Cut the servo horn as
shown in the picture.
Please note that this product is not a toy and not suitable for youngters under the age of 16. Technical details may be
subject to changes and modifications. All images and designs are property of MAGOM HRC. For any doubts or
questions, please contact us throught www.magomhrc.com.
Connect 1A-1B to hydraulic cylinder Nr 1.
Connect 2A-2B to hydraulic cylinder Nr 2.
Connect 3A-3B to hydraulic cylinder Nr 3.
Connect 4A-4B to hydraulic cylinder Nr 4.
2A 3A
1B
1A
STEP 2 Mount the horn to the servo without screw.
Attach the servo to the valve.
Servo horn must not press the rotating valve.
www.magomhrc.com
504099-304
2B
3B
4A
4B
INPUT–
from pump
towards tank
Nr. 2 & Nr. 3 –
twin cylinders
OUTPUT–