Start Up - Kernau KWD 150 W Operating Instructions Manual

Placed the device on a secure, level and stable surface, out of direct sunlight.
Check the voltage on the type plate matches the voltage in your building.
If this is not the case, do NOT switch on your device and return it to your vendor.
The ideal location is near an extractor hood
Leave at least 15 cm between the rear of the device and the wall or other objects
for sufficient ventilation.
The drying process lasts between 2 and 6 hours and/or on average 3-4 hours, without
cooling phase, or approx. 1-2 hours, depending on the humidity level of the organic waste.
Note!
Switching on the device: A short press on the ON/OFF button. (button lights up)
Switching off the device: Press and hold the ON/OFF button for 7 secs.
Automatic switch off: 15 secs. after the end of the drying process. (ON/OFF button
light goes out).
Only heating and stirring are automatically switched off. The venti-lator
continues, however.
Press and hold the ON/OFF button for 7 secs to fully switch off the device.
Automatic cleaning: Press and hold the ON/OFF button for max. 3 secs to
start the automatic cleaning cycle.

START UP

EN
26