Hobbes SURVLtest User Manual
  1. Manuals
  2. Brands
  3. Hobbes Manuals
  4. Test Equipment
  5. SURVLtest
  6. User manual

Hobbes SURVLtest User Manual

Multi-function cctv tester
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SURVLtest
Multi-function CCTV Tester
User Manual
（V01.00）

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SURVLtest and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Hobbes SURVLtest

Summary of Contents for Hobbes SURVLtest

  • Page 1 SURVLtest Multi-function CCTV Tester User Manual （V01.00）...
  • Page 2 Thank you for purchasing the SURVLtest. Please read the manual before using SURVLtest and use properly. For using SURVLtest safely, please first read the 「 Safety Information」 carefully in the manual. The manual should be kept well in case of reference. Keep the S/N label for after-sale service within warranty period.

  • Page 3: Table Of Contents

    Content 1 .Safety information ..........................1 2. SURVLtest Introduction ........................2 2.1 General ............................2 2.2 Packing list ..........................2 2.3 Function interface ........................3 3. Operation ............................. 6 3.1 Installing the Battery ........................6 3.2 Instrument connection ........................ 7 3.2.1 IP camera connection ......................
  • Page 4 3.3.15 AHD camera test ......................57 3.3.16 Network tool ....................... 58 （1）IP address scan ......................58 （2）PING Test ........................59 （3）Network test (Ethernet bandwidth test) ................ 60 （4）Port Flashing ........................ 63 （5）DHCP server ........................ 65 （6）Trace route ........................65 （7）Link monitor ........................ 66 3.3.17 Rapid IP Discovery .....................
  • Page 5 3.4 Audio test ..........................97 3.5 HDMI output ........................... 97 3.6 PoE power output ........................97 3.7 DC12V 3A power output ......................98 3.8 USB 5V 2A power output ......................99 4. Specifications ..........................100 4.1 General Specifications ......................100...

  • Page 6: Safety Information

    1 .Safety information  The tester is intended to use in compliance with the local rules of the electrical usage and avoid to apply at the places which are inapplicable for the use of electrics such as hospital, gas station etc.

  • Page 7: Survltest Introduction

    SURVLtest very user- friendly. SURVLtest is also a great tool for Ethernet network testing. It can test PoE power voltage, PING, and IP address searching. You can use the digital cable tracer to locate individual connected cables from a bundle of cables.

  • Page 8: Function Interface

    2.3 Function interface Press more than 2 seconds, turn on or off the device, short press to turn on or off the menu display Menu key. Press it to call shortcut- menu 4X zoom the image displays. Far focus: Focus the image far away Near focus: Focus the image nearby TELE: Zoom in the image WIDE: Zoom out the image...
  • Page 9 Open/set, confirm the setting of parameters, open or enlarge the aperture Return/Close : Return or cancel while setting parameters of the menu, close or decrease the aperture Upward, set function or add parameter. Tilt the PTZ upward Rightward, select the parameter whose value will be changed. Add the value of the parameter.
  • Page 10 Top interface Bottom interface RS485 Interface: RS485communication for the PTZ HDMI IN Video signal output（BNC interface）/ cable tracer interface CVBS input /AHD /TVI/CVI Coaxial interface PoE power supply output or LAN test port (Use to test PoE or non-PoE IP camera) PSE power sourcing equipment.

  • Page 11: Operation

    USB 5V 2A power output (used only for power, not data) UTP cable port: UTP cable tester port/ Cable tracer port Micro SD card moveable, (comes with 8GB, supports up to 32GB) HDMI output interface 3. Operation 3.1 Installing the Battery The battery main switch at the right-bottom corner of tester bottom。...

  • Page 12: Instrument Connection

    Note: 1) If the IP camera requires PoE power, then connect the IP camera to the SURVLtest’s LAN port. The tester will supply PoE Power for the IP camera. Click on the icon labeled POE to turn the PoE Power on or off.

  • Page 13: Analog Camera Connection

    sourcing equipment are allowed to connect to the tester’s PSE port, and the PoE power will be supplied to the IP camera by the tester’s LAN port. In this condition, the tester cannot receive data from IP camera, but the computer connected to the PoE switch can receive the data via the tester. Warning: PoE switch or PSE power sourcing equipment can only be connected to tester “PSE IN”...

  • Page 14: Hd Coaxial Camera Connection

    3.2.3 HD Coaxial camera connection * CVI, TVI, AHD camera are classified as HD coaxial cameras. Hereby the following instruction of how to connect CVI camera to the tester is also applied to TVI and AHD camera. (1) Connect the CVI camera's video output to the IP tester’s “HD IN” interface, the image will display on the tester.

  • Page 15: Hdmi In

    3.2.4 HDMI IN DVR or other device’s HDMI out port connect to tester’s HDMI in port, the meter will display input image. 3.3 OSD menu Press and hold the key for 6 seconds to turn on the tester Press and hold the key again to turn off or reboot the tester Short press the key to enter sleep mode, press it again to turn on from sleep mode...

  • Page 16: Lite Mode

    Lite mode Lite mode: You can easy find corresponding APPS In Lite mode, click the finger icon in the top right corner to yellow, long press the icon to move the function icon to other items. Do not click the finger icon and long press the application icon because it can move the icon to folder.

  • Page 17: Drop-Down Menu

    Drop-down Menu Press and slide at right top right corner twice to open shortcut menu. The shortcut menu includes PoE power output, IP settings, Wi-Fi, HDMI IN, CVBS, TV OUT, LAN INFO, brightness settings etc. HDMI: Click HDMI to enter HDMI IN mode, it can converts test from analog to digital with dual test window IP &...

  • Page 18: Short Cut-Menu

    Short cut-menu You can call shortcut menu by press tester’s “menu” key, you can self-define shortcut menu. Press the key“ ” to open shortcut menu and switch functions, then press to enter app, tap other area on the screen, to exit the menu. Short cut-menu setting, you can long press any APP in the All Application list, it will auto move to shortcut menu.

  • Page 19: Screen Capture

    Screen capture Long press the key “ENTER” can capture screen interface and save it in any time. You can go File Explorer – sdcard or internal_sd – Screenshots to view your screen shots pictures. TesterPlay To connect mobile phone to the tester’s WIFI hotspot, or the tester and mobile phone connect to the same Wi-Fi network.
  • Page 20 PC screen projection： Install VLC player in the PC, turn on the VLC player "Media - Open Network Streaming", and input the RTSP address of on the top instrument two-dimensional code, click "play" to view the screen real-time projection. (You also can install “VLC player” in the mobile phone, tester and mobile phone display at the same time) Page.15.

  • Page 21: Rapid Video

    Rapid video Press and enter function, one key to detect all network cameras and auto play the images. Auto log in and display camera image. Detailed operations refer to ONVIF function. Page.16.

  • Page 22: Ip Discovery

    After exit ONVIF app, Click Refresh to search IP address. IP discovery Press IP discovery , tester auto-scan the whole network segment IP, as well as auto-modify the tester‘s IP to the same network segment with the scanned camera's IP. Page.17.

  • Page 23: Rapid Onvif Test

    Local IP：Tester’s IP address, Tester can auto-modify the tester‘s IP to the same network segment with the scanned camera's IP. Discovery IP：Connected tester equipment’s IP address. If the camera connected to the tester directly, tester will display the camera’s IP address, if tester connects to Local Area Network, it displays the current IP address.
  • Page 24 Click the button “Refresh”, tester will scan the ONVIF camera again. Click the newly displayed ONVIF camera on the “Device List“. The tester will show the IP camera’s relative information and settings. Activate camera: When connected un-activated camera, tester can auto recognized, and prompt "The camera is not active, you need to activate it", click "OK"...
  • Page 25 Pop-up settings menu when click the “ONVIF setting” icon on the upper left corner Across network segments scan: After open this function , enter “Setting - IP Settings - Advanced” to add other network segments IP, Rapid ONVIF function can across network segments to scan camera’s Auto Login: After open this function, tester can auto login camera and display camera image.
  • Page 26 While in the “Live video” menu, click “Video Menu” at the top right of the image to access the following tools: Snapshot, Record, Photo, Playback, PTZ and Settings. ONVIF PTZ control: Tap the image in the direction you want the PTZ camera to move. Tap the left side of the image to move left, right to go right, up to go up and down to go down.
  • Page 27 IP camera video settings: Click “Video Set” to enter the IP camera’s encoder and resolution settings. Make the desired changes and click “OK “to save. Image setting: Click “Imaging Set” to adjust image brightness, saturation, contrast, sharpness and backlight compensation mode. Page.22.
  • Page 28 Profiles：Click “profiles"，can view video streaming current configuration files, as well as switch between Major stream and minor stream. Preview pictures：Quickly preview and zoom in or out pictures, automatically and manual refresh. Page.23.
  • Page 29 Identification: Click “Identification” to view information of the camera. Time set: Click “Time set”, select "Manual set" to set up the time of camera. Page.24.
  • Page 30 Maintenance: For camera software reset or restore to factory settings. User Set: Modify camera user name, password etc parameters. Page.25.
  • Page 31 Network set: Click “Network Set “to change the IP address. Some cameras cannot support change IP address, so there is no change after saving. Zoom in image: Press the key to enter the zoom mode. Press it again to exit zoom mode. When the image is enlarged tap left, right, up or down on the image to move the whole image on the screen.
  • Page 32 When the image is enlarged, if not operate on touch screen, it can operate by the keyboard, press the to zoon in, press the key to zoom out, press upward and downward key to move image. If it is network video input to the tester, as the tester supports resolution up to 1080p, the input image will be very clear after it is enlarged.
  • Page 33 Playback： Click the “Playback” icon to view the saved videos. Double click the video you want to play. Click to return to the last menu. To rename or delete a photo, click and hold on the file until this screen appears: Video files can play in the Video player on the main menu.
  • Page 34 Call the preset position: Select the preset number on the left, click "Call" to call preset. PTZ Speed set: Horizontal and Vertical Speed set. RTSP: Get RTSP address of the current camera. Doc: Auto create testing reports document of camera, click "Create document”. Click Preview to view the report document.
  • Page 35 Enter the camera test information, click "Create Document" to complete the report. Page.30.

  • Page 36: Ip Camera Test

    Click “Doc” menu again, you can preview the report document. Icons description: the description of function icons on the bottom toolbar. IP camera test Display image from the 4K H.265 camera by main stream Note: Currently, the IPC Test APP only supports some brands’ IP cameras, these include specific models made by ACTI, AXIS, Dahua, Hikvision, Samsung, and many more.
  • Page 37 IP camera type: Click on the IP Camera type to select the Manufacturer and model number of the integrated IP camera. “Manual”：Click IP camera type, list Honeywell, Kodak, Tiandy, Aipu-waton, ACTi, WoshiDA IP camera etc. If the brand has offered official original protocols, please select camera type, input IP camera address, user name and password, click”...
  • Page 38 IP camera test interface. Once you are viewing video on the SURVLtest APP, you will see the “Video Menu” icon on the top right. This button will give you access to Snapshot, Record, Photo, Playback, PTZ, and Set.

  • Page 39: Hdmi In

    HDMI IN HDMI in HD signal test, Tap icon “ ”to enter When tester receives HDMI in image, the top tool bar shows the resolution of this image. You can select “resolution” to set resolution in the setting menu. Tap screen by twice, full image display. Support resolution below 720×480p /720×576p /1280×720p /1920×1080p /1024×768p/1280×1024p /1280×900p /1440×900p (1) Snapshot...
  • Page 40 (2) Video record When you click the “Record” icon, video starts recording. A red recording icon appears on the screen and begins to flash and a timer appears indicating the time elapsed for the video. Click on the “Record” icon again to stop recording and save the video file to the SD card. If select manual storage, go to dialog box “Input Name”, user-defined the files name (by Chinese character, English letter ,or digit) to store in SD card before recording, tester will hereby store the files in SD card after recording.
  • Page 41 (3) Photo Click the icon “photo” to enter, click the selected thumbnail photo to display it on the screen. Double-tap the image can view full screen. Double-click again the photo to return. To rename or delete an image, click and hold on the file until this screen below appears Click to close and return to PTZ controller.
  • Page 42 (4) Recorded video playback Click the “Playback” icon to view your recorded videos. Tap on the video file image you want to watch. To rename or delete a video, click and hold on the file until this screen appears: Video files also can play in the main menu “Video Player". Page.37.

  • Page 43: Video Monitor Test

    Video monitor test Analog camera test and PTZ control, click icon to enter Display the input video image, click the top menu bar icon to enter video level meter (PEAK level, SYNC level, COLOR BURST measurement) Select relative function on the right side Toolbar to operate , functions including “Photos”, “Snapshot” , “Record”...
  • Page 44 Call some special preset number, can call the dome camera menu. Check and set the protocols, address, interface and baud, all must be consistent with the dome camera then the SURVLtest can test. After setting the parameter, the tester can control the PTZ and lens.
  • Page 45 PTZ Control: Press the key control the PTZ direction of rotation Press the key , to switch on or turn off the aperture. Press the key , adjust the focus manually Press the key , manually adjust the zoom (2) Video and storage setting Click icon “set”, to enter and set analog video image brightness, contrast, color saturation, as well as the file storage way after snapshot and recording, support auto-storage and manual storage.
  • Page 46 (3) 4X zoom image display and Video out When image input, press to enter “zoom”, press it again to quit. Using the touch screen to control PTZ camera movement: Tap left, right, upward or downward on the video image to move the PTZ camera in a desired direction. Stretch two fingers outward or inward on the touch screen to zoom the image in or out.
  • Page 47 (5) Video record When you click the “Record” icon, video starts recording. A red recording icon appears on the screen and begins to flash and a timer appears indicating the time elapsed for the video. Click on the “Record” icon again to stop recording and save the video file to the SD card. If select manual storage, before recording begins, go to dialog box “Input Name”, user-defined the files name (by Chinese character, English letter, or digit) to store in SD card, tester will hereby store the files in SD card after recording.
  • Page 48 (6) Photo Click the icon “photo” to enter, click the selected thumbnail photo to display it on the screen. Double-tap the image you want to view to make it full screen. Double-click again the photo to return. To rename or delete an image, click and hold on the file until this screen below appears Click to close and return to PTZ controller.
  • Page 49 (7) Recorded video playback Click the “Playback” icon to view your recorded videos. Tap on the video file image you want to watch. To rename or delete a video, click and hold on the file until this screen appears: Video files also can play in the main menu “Video Player". (8) Video level meter Click the icon to enter, the IP camera tester has adopted hardware high-speed sampling and...
  • Page 50 While in PAL format, the unit will be mV, While in NTSC format, it will be IRE. Video signal level 140±15IRE NTSC Chroma level( COLOR BURST) 40±5IRE SYNC signal level 40±5IRE Video signal level 1000±200mV Chroma level( COLOR BURST) 300±35mV SYNC signal level 300±35mV Video signal PEAK to PEAK level:...

  • Page 51: Color-Bar Generator (Tv Out)

    can get fall below the threshold for the video display to show a color image. For NTSC format, the Chroma standard level is 40 IRE For PAL format, the Chroma standard level is 280mV If the Chroma level is too low, the color will not be as deep, and some details of the image will become lighter.
  • Page 52 Application BNC loop test: Tester can send and receive color bar generator through the tester’s “video out and video in” port, it is for testing transmission channels, such as video Optical, video cables etc. The tester “VIDEO OUT” port to connect optical terminal’s sending port, and “VIDEO IN” Port to optical terminal’...

  • Page 53: Cvi Camera Test

    CVI camera test HD CVI camera, CVI dome camera test and PTZ control, click icon to enter When HD CVI signal input, the tester will display the image resolution on the top bar. Double-taps on the screen to make the image displayed full screen. The tester supports resolution as follows 1280x720P 25FPS / 1280x720P 30FPS / 1280x720P 50FPS / 1280x720P 60FPS 1920x1080P 25FPS / 1920x1080P 30FPS/2560x1440P 25FPS/2560x1440P 30FPS./ 3840 x 2160...
  • Page 54 （1）PTZ control 1.1 Coaxial PTZ control Click the icon “PTZ” on the right toolbar to do the corresponding setting. “Port”: select coaxial control Enter PTZ address to perform parameters setting. Operation instructions, please refer to “3.3.1 PTZ (1) Video monitor test”. Page.49.
  • Page 55 The PTZ address in the tester must be consistent with the dome camera or decoder, then the SURVLtest can test .After setting the parameter, the tester can control the PTZ and lens. To control PTZ by touch screen: Tap left, right, upward and downward on the touch screen to control the PTZ rotation direction, PTZ cameras will rotate accordingly.
  • Page 56 Call preset position Tap the preset position: Tap the preset position area, input preset position number. Tap “call position” to complete call preset position. Page.51.
  • Page 57 1.2 RS485 control Operation instructions, please refer to “3.3.1 PTZ (1) PTZ control parameters setting”. （2）Coaxial camera menu setting Tap icon “UTC”, select “menu setting” to enter the dome camera menu. Page.52.
  • Page 58 Input calling dome camera menu address code, after finishing the parameter settings, you can press the or click the icon to call the dome camera menu. Press arrow keys to set. Page.53.
  • Page 59 (3) Snapshot, record, photo viewer and video play back, please refer to “3.3.1 PTZ (1) Video monitor test”. Tap “close menu” or press the key “ ”to close camera menu. (4) Save setting Click icon “Set” on the right toolbar to enter storage setting. Support auto-storage and manual storage.

  • Page 60: Tvi Camera Test

    TVI camera test HD TVI camera, TVI dome camera test and PTZ control, Click icon to enter When HD TVI signal input, the tester will display the image resolution on the top bar. Double-taps on the screen to make the image displayed full screen. The tester supports resolution as follows: 1280x720P 25FPS / 1280x720P30FPS / 1280x720P 50FPS / 1280x720P 60FPS 1920x1080P 25FPS / 1920x1080P 30FPS / 1920x1080P 50FPS / 1920x1080P 60FPS /2048x1536P...
  • Page 61 Coaxial camera menu settings Tap icon “UTC”, select “menu setting” to enter the dome camera menu. Input calling dome camera menu address code, after finishing the parameter settings, you can press the or click the icon to call the dome camera menu. More operation instructions (such as PTZ control, coaxial camera menu setting, snapshot, recording and playback etc), please refer to“3.3.6 CVI camera test”.

  • Page 62: Ahd Camera Test

    AHD camera test AHD camera, AHD dome camera test and PTZ control, Click icon to enter When AHD signal input, the tester will display the image resolution on the top bar. Double-taps on the screen to make the image displayed full screen. The tester supports resolution as follows: 1280x720P 25FPS / 1280x720P 30FPS / 1920x1080P 25FPS / 1920x1080P 30FPS/2048x1536P 18FPS/2048x1536P 25FPS/2048x1536P 30FPS /2560x1440P 15 FPS/2560x1440P 25 FPS/...

  • Page 63: Network Tool

    (1) Coaxial PTZ control UTC control: select “PTZ control or PTZ control-2” (AHD camera has two different order, if select “PTZ” cannot control, please go “PTZ-2” ) If to coaxial PTZ control the AHD camera, no parameters setting is needed. More operation instructions please refer to “3.3.6 CVI camera test”.

  • Page 64: 2）Ping Test

    （2）PING Test PING is the most conventional network debugging tool; it is used for testing if the connected IP camera or other network equipment’s Ethernet port is working normally and the IP address is correct. Connect a network cable to the LAN port and click the icon to open the PING tool.

  • Page 65: 3）Network Test (Ethernet Bandwidth Test)

    Network test (Ethernet bandwidth test) To use Network test, you will need two SURVLtest. One is used as a Server and the other as a Client. Both devices must be on the same network segment in order to communicate. Click the icon to open the Network Tester APP.
  • Page 66 Start send packet test: Using the other SURVLtest, type in the Server's IP address at the top right corner of the screen. This APP is used to send packets for network speed testing. Click the “Start” button to send the packets and start testing.
  • Page 67 Network bandwidth testing can also be tested with a computer using compatible network bandwidth testing software. Install network bandwidth testing software on a computer, as a test Client or Server, to do the mutual testing with the tester. If use computer as the server, the computer IP address is: 192.168.0.39 Tester as Client, tester’s IP address is: 192.168.0.238.

  • Page 68: 4）Port Flashing

    Or use tester as a Server, computer as test Client（select Client, input tester’s IP address to test） When use tester as Server, it shows results: （4）Port Flashing Connect a network cable to the meter’s “LAN” port, click the icon to open the Port Flashing APP.
  • Page 69 If the tester and PoE switch are connected well, the LAN port of PoE switch flashes at special frequency, if not, there’s no any changes on the LAN port. Application: The tester will send special signals to make the connected LAN port flicker at special frequency, which will enable the installers to easily and quickly find the connected Ethernet cable.

  • Page 70: 5）Dhcp Server

    （5）DHCP server Click on the DHCP icon to open the DHCP server APP. Select the “Start” check box at the top and make any desired changes to the network settings. Click “Save” to start assigning dynamic IP addresses for IP cameras and other networked devices. Click the “Refresh” button to check your Client list.

  • Page 71: 7）Link Monitor

    Click “start” to trace the goal address. （7）Link monitor Click the icon to open the Link Monitor APP. This APP is used to see if an IP address is occupied by other network devices. This will avoid new address conflicts. Click “Add”...

  • Page 72: Rapid Ip Discovery

    Application: Add an IP camera or other network device to the current network group, the new IP address must not be occupied, otherwise it will cause IP conflicts and stop the equipment normal working. Link monitor can check if the new setting IP address is occupied. Rapid IP Discovery Connect the cable to tester’s LAN port.
  • Page 73 The IP camera needs to be connected to the LAN port before you turn PoE Power on. If the IP camera Supports PoE, the PoE power is delivered via pins 1, 2, 3, and 6 on the LAN port. SURVLtest will display “48V ON”...

  • Page 74: Cable Test

    Cable test Click icon to enter Test LAN cable or telephone cable. Connect LAN cable or telephone cable with the CCTV tester and cable tester. And then the connection status, cable type and the sequence of wires as well as the serial number of the cable tester kit will be displayed.
  • Page 75 Single test: Test cable status, length and attenuation. Repeat test: Continue to test cable status, length and attenuation. Status: After link up, screen display “online”, if not link up or open circuit, screen display ”open circuit”, if cable pair is short circuit, screen display “short circuit”. Length: The max test length is 180 meters, when cable is open circuit or short circuit, can test the cable length, if screen display “online”, the testing result would be not accurate.
  • Page 76 Attenuation reflectivity: After link up, if reflectivity value is 0, it is the best quality communication. Impedance: After link up, if the impedance value is 100Ω, it is the best quality communication, the range is generally in 85-135Ω. Skew: After 1000M link up, when skew value is 0ns, it is the best quality communication, if over 50ns, will cause a Bit Error Rate in the transmission.

  • Page 77: Poe Voltage Test

    Click “Help”, check the instruction of all parameters. PoE voltage test Click icon to enter PoE voltage measurement Connect a network cable from a PoE switch to the IP tester’s PSE IN port. Connect an IP camera or other PoE using node to IP tester’s LAN port, the PoE voltage and the cable’s pin connection status show on the screen.

  • Page 78: Power Input Test

    Note: This test if for measuring the voltage being drawn by the PoE node and SURVLtest must be between the PoE switch and the PoE node for this test to work. Note: The PoE switch must be connected to the PSE IN port. The powered device such as IP camera or other PoE node must be connected to the LAN port.

  • Page 79: Audio Record

    Audio record Connect an audio device to the SURVLtest audio input port. Click the icon to enter the Audio Recorder APP. Click the red button to stop, and the unit will prompt you to save the recording.

  • Page 80: Data Monitor

    Data monitor Please click icon to enter. Click “Setting” to choose the baud rate of RS485; it must be the same as the DVR or the control keyboard The DVR or Control keyboard send the code to the tester, if it can be read, the protocol will shown on the upper right, like Pelco D, if not, like P:--- While the tester receives the code, press the key to empty.

  • Page 81: Rtsp Player

    The RTSP Player APP will allow you to view the RTSP video stream from an IP camera. If you were unable to view your camera via the ONVIF or SURVLtest APPs, it is possible your camera will have an RTSP stream and you can view live video.
  • Page 82 From the main menu, select the “APP Tool” folder and then select the “RTSP Player” to open the APP. If the IP camera uses MJPEG, select the RTSP icon. If the IP camera uses H.264, select the “RTSP HD” icon. Local IP: This is the IP testers IP address.

  • Page 83: Hik Test Tool

    Note: In the event the SURVLtest does not auto detect the RTSP stream, refer to the specific camera manufacturer for the specific RTSP stream URL. You may find this on line with a search of the camera model number and the word RTSP.
  • Page 84 Auto open ONVIF protocol: After activation, the new HIK cameras click "play, modify the channel name, modify network information, modify user information" to open the selected camera ONVIF protocol. Play: Security status shows the "activated" camera. Enter the correct camera password in the right [password] and click [play] to pop up the "private protocol"...
  • Page 85 Modify network information: Support "modify" and "batch modify" camera IP address, subnet mask and other parameters modification. Enter a new IP address and subnet mask, the default gateway will be auto modified according to the IP address. Click "OK" to save the changes. Page.80.
  • Page 86 Modify user information: Modify the camera's user name and password. Page.81.

  • Page 87: Dahua Test Tool

    Factory reset: Camera factory reset Dahua test tool Dahua test tool is developed for installation and debugging of the Dahua IP camera, it can display image, and modify IP, user name and password etc. Making Dahua camera test more convenient and quickly.
  • Page 88 Activate and Batch activate are optional, support reserved phone number for resetting password. Play: When mode display “activated” camera, input correct password, click “Play” pop up “private protocol” and “ONVIF”, select correspond protocol to view the camera image. Page.83.
  • Page 89 Modify channel: Click “Modify channel”, will pop up OSD setting, includes time, channel name, etc After selected channel name, can edit channel name, modify the display position and font size. If select “Default position”, then no need to modify. If select “customize”, then can modify channel name and display position, click “OK”...
  • Page 90 Modify Network: Support Modify and batch modify two ways, user can modify camera IP address, Subnet mask, and Gateway. Page.85.
  • Page 91 Input new IP address, need to input password, click “OK” to save the modification. Modify user information: Modify camera user name and password, which are ONVIF, Dahua test tool, SURVLtest user name and password, not web user name and password. Page.86.

  • Page 92: Update

    Factory reset setting: Camera will be soft reset, and the device’s user name, password and network set be saved. Other settings information is factory reset. Update Copy the downloaded update file to SD card "update" directory, if no directory, please create one. icon to open the Update menu.

  • Page 93: Office

    If there are update programs, applications will be listed in the interface, click related applications, update to the latest version. Update online: Before using online update, need enter settings-user management to register first. System update: Connect the Internet to update systems. Office Quick office APP (support excel, word, ppt format) doc.

  • Page 94: Led Flashlight

    Type in the camera’s IP address and press “Go” to access the IP camera’s Click icon interface. NOTE: You will not be able to view live video in the web browser. For viewing video, use the SURVLtest’s Live Camera view APPs. Page.89.

  • Page 95: Notepad

    The IP camera and SURVLtest should be on the same network segment for the browser to interface with the camera. If they are not in the same segment, click the button or press “RETRUN” to exit. Open the “Settings” APP from the main menu to change the SURVLtest’s network settings to match those of the IP camera.

  • Page 96: System Setting

    System setting Click icon to enter Language: Select your desired language: English, Traditional Chinese, Simplify Chinese, Korean, Russian, Italian, Polish, Spanish, French, Japanese or Deutsche. Typewriting: You can select typewriting or install other typewriting: Page.91.
  • Page 97 Date/Time: Set the Date/time of SURVLtest. IP setting: Manually set the IP address, Sub-net Mask, Default Gateway and DNS address or select “Dynamic allocation” to use DHCP. To test multiple network segments, click “Advanced” and then click “Add” to enter another IP address for the tester.
  • Page 98 Select and press “WIFI” several seconds, to set static IP address. Wi-Fi hotspot: input “SSID” name and “password”, and then click “ok” to create Wi-Fi hotspot. Brightness: Set the desired brightness of the IP tester and adjust the sleep time settings. Volume: Set volume level.
  • Page 99 FTP server: Once the IP tester connects to a network, a computer can be used to read the SD card files via FTP. Start the FTP server and then input the tester’s FTP address in the PC’s address bar. This will enable the PC to reads, copy and edit the files from the SD card without the use of SD card reader.

  • Page 100: File Explorer

    registration information to register. User Feedback: if you have any comments or suggestions for the tester, please connect it to network and write your feedback. Lock Screen: The tester default is not locked. You can choose password Lock screen, pattern Lock screen or “NO”.
  • Page 101 Browse It includes Music, Videos, Pictures, Documents, zip file etc. It is convenient to view and manage. FTP server You can choose internal or external SD card. Other operations details, Please refer to FTP settings. Page.96.

  • Page 102: Audio Test

    The built in HDMI output port can output live video from an analog or IP camera, recorded files, media files and images to HDTV monitors. Connect an HDMI cable from SURVLtest to an HDTV monitor at any time. It supports up to 1080P resolution.

  • Page 103: Dc12V 3A Power Output

    3.7 DC12V 3A power output When the SURVLtest is turned on, the DC 12V power output is also ON by default. The smaller end of the supplied converter cable connects to the tester’s DC12V/3A OUTPUT and the other end connects to the camera’s power input.

  • Page 104: Usb 5V 2A Power Output

    Disconnect all cables from the tester and reboot it to resume using the tester. The SURVLtest power output is close to 3A, if the IP camera’s power is over 3A, the tester will auto enter protection mode. Disconnect all the connections of the tester and then connect the tester with power adaptor to resume the tester.

  • Page 105: Specifications

    4. Specifications 4.1 General Specifications Model HST319 New 7 inch retina touch screen Multi-function CCTV tester, 1920*1200 Display resolution Network port 10/100/1000M auto adjust, RJ45 Built in Wi-Fi, speeds 150M, allows you to connect to a wireless network Wi-Fi and view IP cameras New hardware decoding, 4K, H.265/H.264 camera image display by H.265 Mainstream mainstream testing...
  • Page 106 1 channel TVI input（BNC interface, resolution support 720p 25,30,50,60fps/ 1080p 25,30fps /2048x1536p 18,25,30fps , 2560x1440p TVI video signal test 15,25,30fps/ 2688x1520p 15fps , 2592x1944p 12.5,20fps 3840 x 2160 12.5/15 FPS，UTC control and call OSD menu 1 channel AHD input （BNC interface）, resolution support 720p 25,30fps / 1080p 25,30fps/2048x1536p 18,25,30fps , 2560x1440p AHD video signal test 15,25,30fps/ 2592x1944p 12.5/20fps，...
  • Page 107 number on the screen Captures and analyzes the command data from controlling device, also can Data monitor send hexadecimal IP address scan, LINK scan, and Ping test. Quickly search the IP camera’s Network test IP address on your network Cable tracer Find a connected cable from a bundle of cables using digital audio tones PoE /PSE voltage test Measures PoE switch voltage and displays pin configuration...

Table of Contents