CaryMart S2MU-DC06 Manual

RF Wireless Remote Control Radio Controller / Transmitter & Receiver

Package Include:

1 x Receiver: S2MU-DC06 / S2MU-DC09 / S2MU-DC12 / S2MU-DC24 (2 Channel / 4 Control Modes)
2 x Transmitter: C-2
1 x User manual

Feature:

Wireless control, easy to install
Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC 110~240V or DC 0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass
through walls, floors and doors.
With characteristics of reverse power protection and over current protection
Audible / visual indication
Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 315MHz or 433MHz
Function of memory: The power is cut off, and then the power is restored, the relay will return automatically to the previous status.

Receiver:

Model No.: S2MU-DC06 / S2MU-DC09 / S2MU-DC12 / S2MU-DC24
Channel: 2 CH
Control Modes: Toggle, Momentary, Latched, Momentary + Toggle (with Memory)
Decode: Learning code
Power Supply (Operating Voltage): DC6V (S2MU-DC06), DC12V±1V (S2MU-DC12), DC9V±1V (S2MU-DC09), DC24V±1V (S2MU-DC24)
Working Voltage Range of Relay: AC 110~240V or DC 0~28V
PCB size: 67mm x 50mm x 18mm
Case size: 75mm x 54mm x 27mm
Maximum Working Current: 10A / each channel

Transmitter:

Model No.: C-2
Channel: 2 CH
Remote Control Distance: 100m / 300ft (theoretically)
Encode: Fixed code by Soldering
Unit size: 58mm x 39mm x 16mm
Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Usage:

Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as
following operation):
Setting control mode Toggle: Only connect Jumper-2.
Control mode Toggle: Press -> On; Press again -> Off.
Press button 1: Turn on the relay 1 (connect B and C, disconnect A and B)
Press button 1 again: Turn off the relay 1 (disconnect B and C, connect A and B)
Setting control mode Momentary: Only connect Jumper-1.
Control mode Momentary: Press and hold -> On; Release -> Off.
Press and hold button 1: Turn on the relay 1 (connect B and C, disconnect A and B)
Release button 1: Turn off the relay 1 (disconnect B and C, connect A and B)
Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
Control mode Latched: Press -> On, another relay Off; Press another button -> Off.
Press button 1: Turn on the relay 1 (connect B and C, disconnect A and B)
Turn off the relay 2 (disconnect B and C, connect A and B)
Press button 2: Turn on the relay 2 (connect B and C, disconnect A and B)
Turn off the relay 1 (disconnect B and C, connect A and B)
Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.
Control mode Momentary (Channel 1): Press -> On; Press again -> Off.
Press and hold button 1: Turn on relay 1 (connect B and C, disconnect A and B)
Release button 1: Turn off relay 1 (disconnect B and C, connect A and B)
Control mode Toggle (Channel 2): Press and hold -> On; Release -> Off.
Press button 2: Turn on relay 2 (connect B and C, disconnect A and B)
Press button 2 again: Turn off relay 2 (disconnect B and C, connect A and B)
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: sale@carymart.com