Wall Mounting; Start The Beehive - GNE Beehive User Manual

④ Beehive and data collector are correctly connected with RS485 cable (please
refer to "Installation User Manual").
3.3、Wall Mounting
①. Drill holes according to P3.1 diagram and insert into the expansion tube, then
screw in the screw, the exposed height of the screw is 5.5-6.5mm.
Figure 3-1 Punching Diagram
Figure 3-2 Expansion screw installation diagram
②. Align the screws with the mounting holes on the back of Beehive, and then
move Beehive down so that the screws completely hang on the product and
complete the wall installation.
3.4、Start the Beehive
After the Beehive is powered on, the system will be initialized, during which
"GNE Beehive initialized..." will be displayed on the screen as shown in figure
3-3.
8 / 24 _______________________________________________________________________________
Jiangsu GNE New Energy Technology Co., Ltd. | 1F/B No.218 Hongkou Road, Liyang 213300, Jiangsu, CHINA
Tel:+86-519-8728 1798 Fax:+86-519-8728 1678 Email:
Beehive User Manual V3.0
service@gnetek.com Web:www.gnetek.com