Installation; Before Installation; Installation Steps - GNE Beehive User Manual

3. Installation

3.1 Before Installation

To ensure that Beehive works properly, Beehive needs to be installed in a
place where wireless communication and network connection are normal. If
installed outdoors, a protective box needs to be added.
There are two ways to install Beehive:
① . Horizontal installation (if placed on the desktop).
② . Vertical installation (for example, on the wall, refer to "Wall Installation
Instructions").
There are two main ways of network connection:
①. Network cable connection (recommended method).
②. WIFI connection (recommended where the mobile phone WIFI signal 2 or
more).
3.2、Installation Steps
① Insert the network cable into Beehive's network cable interface or WIFI
antenna interface and install WIFI rod antenna.
② The communication antenna interface is equipped with a communication
sucker antenna.
③ The power interface is connected to the power adapter.
7 / 24 _______________________________________________________________________________
Jiangsu GNE New Energy Technology Co., Ltd. | 1F/B No.218 Hongkou Road, Liyang 213300, Jiangsu, CHINA
Tel:+86-519-8728 1798 Fax:+86-519-8728 1678 Email:
Beehive User Manual V3.0
service@gnetek.com Web:www.gnetek.com