GNE Beehive User Manual page 24

For example, the current time is 201612261008.50, if you want to modify
the corresponding position, use the left and right keys (that is, MENU key and
OK key) to select the corresponding position (the currently bit will flash), and
use the up and down keys to adjust to the desired digital. After the
modification is completed, keep pressing the "OK" button to the last digit
(that is, no matter which digit is modified to be saved, you must press the
"OK" button to the last digit), continue to press the "OK" button, save appears
Interface, such as Figure 5-30.
If you want to save the changes, press the "OK" button, if you do not save,
press "MENU" will return to the date setting interface, if you want to exit,
keep pressing the "MENU" button to the leftmost digit (ie the first Number),
press the "MENU" button again, and a system prompt "Quit without save?"
will be entered. If you confirm to exit, press "OK", otherwise press the "MENU"
button to stay Time setting interface. After saving successfully, a prompt
interface (Set Time Succeed) for successful modification will appear. After
prompting 2S, it will automatically return to the previous menu. If the
modification is unsuccessful, the setting time will be incorrect, and the
modification will fail.
23 / 24 _______________________________________________________________________________
Jiangsu GNE New Energy Technology Co., Ltd. | 1F/B No.218 Hongkou Road, Liyang 213300, Jiangsu, CHINA
Tel:+86-519-8728 1798 Fax:+86-519-8728 1678 Email:
Figure 5-30：change date and time
Beehive User Manual V3.0
service@gnetek.com Web:www.gnetek.com