Temperatures Menu - State Water Heaters SSE-5 Instruction Manual

TEMPERATURES MENU

Operating Set Point
will be activated again when the water temperature drops below the
Differential Settings
The water heaters covered in this manual will have between 1
additional heating element installed.
Operating Sequence
On a water heater equipped with 3 heating elements, with an
Element 1
Element 2
Element 3
Tank Temperature
as sensed by the control system from the immersion Temperature
Probe.
Tank Probe Offset
Tank Temperature.
Used to calibrate for slight differences in control system temperature
sensing. This can improve the precision of temperature control in
the storage tank and at points of use. This feature can also be used
prematurely.
20
TABLE 8.
TURN ON TEMP