Table of Contents
Advertisement
10 HOUR / DAILY SERVICE
GREASE FRONT ATTACHMENT PINS
NOTE:
Fittings are greased daily, or every 10 hours, for the first 100 hours of operation to comply
with new machine break-in requirements. After that, greasing should be done every 50
hours. If bucket is being used in water, grease fittings immediately after machine is
removed from water. Follow procedure printed under the 50 hour maintenance interval
"Grease Front Attachment Pins" on page 4-21.
INSPECT ALL TIRES FOR CORRECT TIRE PRESSURE AND SIGNS OF DAMAGE OR ABNORMAL
WEAR
1.
Inflate tires to proper operating pressure for working conditions. See "Tires and Wheels" on
page 4-72.
CHECK ENGINE OIL LEVEL
NOTE:
When checking level using a
dipstick always remove and
wipe it clean before making
final level check.
4-10 Inspection, Maintenance and Adjustment
1
Figure 5 (S/N 3001 thru 4000)
1
Figure 6 (S/N 4001 and Up)
K1000896E Operation and Maintenance Manual
2
AOO0030L
2
BAO0040L
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Mega 250-V and is the answer not in the manual?