Table of Contents
Advertisement
Quick Links
®
Aqua Select
Heavy Duty Resin In-Pool Ladders with Entrapment Barrier
MODEL 832406SC
FOR USE WITH:
AQUA SELECT
EVEREST
32" GATED
ENTRY STEP WITH
IN POOL LADDER
(832406EV)
CARTONS REQUIRED
(1) 832402B — Aqua Select
(1) 832405P — Aqua Select
(1) 832406 — Aqua Select
(1) 832406SC — Aqua Select
Resin In-Pool Ladder
The enclosed ladder will attach to the Aqua Select® Everest step (832402B). Please open the
step carton and assemble the step per the instructions. Refer to this book for instructions on
the assembly and attachment of the ladder when instructed in step manual.
• Drill with 1/8" drill bit
• Small rubber mallet or hammer w/piece of wood
• Phillips head screwdriver
• Pliers
• Spray lubricant or liquid soap
®
®
Everest Steps
®
Pickets
Gate
®
®
Heavy Duty
TOOLS REQUIRED
• 40 Lbs. of Sand
• Funnel
• Hacksaw
7961
Advertisement
Table of Contents
Related Manuals for Aqua Select 832406SC
Summary of Contents for Aqua Select 832406SC
- Page 1 Heavy Duty Resin In-Pool Ladder The enclosed ladder will attach to the Aqua Select® Everest step (832402B). Please open the step carton and assemble the step per the instructions. Refer to this book for instructions on the assembly and attachment of the ladder when instructed in step manual.
- Page 2 Aqua Select ® Heavy Duty Resin In-Pool Ladder Parts PART # MODEL # DESCRIPTION AC HANDRAIL Handrail AC PLATFORM Platform 832402LC Lock Cap AC ADJTUBE Adjustable Tube AC MTBLOCK Mounting Blocks AC MDSTEP Upper Step AC 01129 Capri Leg AC SHIELD...
- Page 3 IMPORTANT SAFETY INSTRUCTIONS PLEASE READ PRIOR TO ASSEMBLY/USE The Ladder must be installed based on Manufacturer’s Instructions • One person on the Ladder/Stair at a time • This Ladder is designed and manufactured for a specific Pool Wall Height and/or Deck of the Pool •...
- Page 4 STEP 3 • Place the Lower Base (AC 01126) on a level surface. • Snap Large Barrier (AC 01123) into the groove on the lower base facing round edge. • Snap Small Barrier (AC 01124) into the groove on the lower base facing the straight side.
- Page 5 STEP 5 FILL LEGS WITH SAND USING A FUNNEL • Using a funnel fill both legs with sand. Use approximately 20 Lbs. of sand in each leg. STEP 6 • Put ladder aside for now and install handrails (AC HANDRAIL) onto platform (AC PLATFORM). •...
- Page 6 • If attaching to a Deck proceed to STEP 7 NOTE • If attaching to a Step to create the Aqua Select Everest Entry ® System proceed to STEP 8 STEP 7—DECK MOUNT Coat adjustable tube (AC ADJTUBE) with lubricant and slip •...
- Page 7 • Using (4) screws from step box (832402B) hardware bag, secure handrails in place. If attaching Aqua Select® Gate System. Please refer to instructions NOTE packed in carton marked 832406...
- Page 8 2. Place ladder mat onto the bottom of USE MODEL 832116 the pool with the smooth side facing Aqua Select ® 9” x 24” MAT down towards the liner 3. Place fully assembled ladder on top of the ladder mat. Make sure the ladder is centered on the ladder mat 4.
Need help?
Do you have a question about the 832406SC and is the answer not in the manual?
Questions and answers