Eastwood Fairmount Tools 31805 Instructions Manual page 5

OPERATION
FOR FLUID EXTRACTION
• Insert the Nylon Tube into the Dipstick
Tube or other orifice until it is determined
the end of the Tube has reached the
bottom of the oil pan or other vessel.
This is necessary in order
to remove the entire volume
of fluid.
• Unfold the Wire Pedal from the base
of the Evacuator (FIG 4).
• Place a foot on the Wire Pedal for
stabilization. Raise the Pump Handle to
the top of it's stroke then push downward
to the bottom of the stroke for complete
pumping action. NOTE: Each full stroke
is approx. 15" (380mm).
• Repeat pumping action until all fluid
is extracted.
To order parts and supplies: 800.343.9353 >> eastwood.com
FIG. 4
5