Table of Contents
Advertisement
SET-UP
• Select the Inlet Adapter with either the
with 39.4" (1 m) x 0.38" (9.8mm) Nylon
Tube or Inlet Adaptor with 59" (1.5 m) x
0.31" (8mm) Silicone Hose.
• Insert the selected Inlet Adapter into the
Inlet/Spout at the top of the Evacuator by
pushing in firmly until seated then turn
15° Counter-Clockwise to lock into
position (FIG 1).
FOR FLUID EXTRACTION
• Determine which Nylon Tube best fits into
the dipstick tube or other orifice being
accessed.
• Using the appropriate Tube Connector,
slip both Nylon Tubes into the Tube
Connector until seated (FIG 2).
The Nylon Tube end must
be clean and free of burrs,
nicks or other damage to
properly seal.
FOR BRAKE BLEEDING
• Place the 90° Brake Bleeder Attachment
with Silicone Hose over the brake bleeder
(FIG 3).
4
Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com
FIG. 1
FIG. 2
FIG. 3
Advertisement
Table of Contents
