The packaging before sterilization is as follows.
1) Put the probe into TYVEK
pouch.
2) Seal the TYVEK Pouch using a
heat sealer. Ensure that the
seal is complete.
3) Put the sealed pouch into a
tray or plastic mesh wire for
sterilization.
TYVEK Pouch
Fig. 1
Packaging in the pouch
TYVEK Pouch
Fig. 2
Tray for
sterilization
Fig. 3
-12-
Probe
Sealed
Probe
Sealing
Probe in
the Pouch
Packaging in a tray
Q1E-EP0659