BMW G 650 Xmoto Rider's Manual page 77

Install axle screw 3 and
tighten to the specified
tightening torque.
Nut on quick-release
axle, front
80 Nm
Without operating the
brakes: firmly compress the
forks and release; repeat
the procedure several
times.
Tighten left axle clamping
screws 2 to the specified
tightening torque.
Front-axle retainer
10 Nm
with OE BMW Motorrad ABS:
Seat the ABS sensor in the
holder and install screw 1 of
the ABS sensor.
Remove the auxiliary stand.
Ease the brake caliper onto
the brake disc.
Install securing screws 1
and tighten to specified
torque.
Adapter plate to slider
tube
50 Nm
Remove the adhesive tape
from the wheel rim.
Operate the brake several
times until the brake pads
are bedded.
Remove the rear wheel
Place the motorcycle on a
suitable auxiliary stand.
7
75
z