3
Use
3.1 Intended use
Appliance is intended for household use and sto-
res, personnel kitchens in offices and other work
environments; use by customers of farm houses
and hotels and other accommodation type envi-
ronments; hostel type places; food and beverage
services and similar non-retail applications.
3.2 Position of appliance
This refrigerating appliance is not intended to
•
be used as a built-in appliance.
When determining a location for your appliance
•
make sure that the floor is level and strong.
It should be a well ventilated location and the
•
average room temperature should be between
16
o
C and 38
o
C.
Do not place the appliance near heat sources
•
such as oven, water heater or central heating.
Do not place the product in places subject to
direct sunlight like annex or sunroom.
If you place the appliance in outdoor locations
•
like a garage or annex, place the appliance
above the damp course, otherwise there may be
condensation in the appliance.
Never place and operate the appliance in built-in
•
walls or in any cabinet or furniture designed for
the appliance. Rear grill and sides of cabinet
may heat up.
Place it in a way that back of the appliance is 9
•
cm (31/2") and sides of the appliance is 6 cm
(3/4") away from wall. Do not use anything to
cover the appliance.
If two Coolers are to be installed side by side,
•
there should be at least 4 cm distance between
them.
Minibar / User Manual
3.2.1 Alignment of appliance
When appliance doesn't stand even, alignment of
the door and the magnetic seal is affected and this
prevents the appliance from operating properly.
When placed in its location, align the appliance by
rotating the adjustable front legs.
3.3 Initial use
Wipe the internal surface of the appliance with
•
diluted sodium bicarbonate solution. Then rinse
with warm water using a sponge or cloth. Wash
the baskets and shelves with soapy water and
allow them dry completely before placing back
in appliance. External parts of the appliance can
be cleaned with wax polish.
Make sure that there is a socket appropriate for
•
the plug supplied with your appliance.
A
WARNING: Do not activate the app-
liance sooner than 4 hours after it
was moved.
It takes time for cooler fluid to be settled. If you
•
turn off the appliance, wait for 30 minutes to
reactivate it. This period of time is necessary for
cooler fluid to be settled.
Before placing food into the appliance, activate
•
the appliance and wait for 24 hours. This period
of time is necessary for appliance to operate
properly and reach the right temperature.
Clean the appliance parts with warm water con-
•
taining some neutral detergent and then wipe
it dry.
A
WARNING: Electric parts of the
appliance should only be wiped with
dry cloth.
5
/ 10 EN