Table of Contents
Advertisement
ADVANCED Menu
1.
Press the Cursor UP/DOWN buttons
one of the following parameter from the list: OSD contrast, Tint
control, NTSC Hue control, ECO mode or SVM. The red point mark
indicates the selected parameter.
2.
Press the Cursor LEFT/RIGHT buttons
quality to your liking.
Select OSD contrast to adjust the contrast level of the On Screen
Display menus.
Select Tint control to adjust your desired skin colour (Cool or Warm).
Select NTSC Hue control to adjust the skin colour (Green or Red)
during NTSC signal reception through the external connectors.
Select ECO mode "On" to attenuate the contrast in the excessively
white areas of the picture.
Select SVM (Scan Velocity Modulator) to change the resolution of the
picture (Low, Medium or High). The TV is factory pre-set to 'Medium'.
In this menu you can switch to the following menus:
Press the RED button
Press the BLUE button
3.
Press the MENU button
1.
Press the Cursor UP/DOWN buttons
Comb filter, Black level expander or Rotation. The red point mark
indicates the selected item.
2.
Press the Cursor LEFT/RIGHT buttons
Select Comb filter (ON) to reduce the colour interference in picture
with fine details and the picture gets sharper.
Select Black level expander (ON) to activate the Dynamic
Compensation in the dark area of the picture.
Select Rotation to rotate the picture until the lines are perfectly
horizontal.
In this menu you can switch to the following menus:
Press the RED button
Press the YELLOW button
3.
Press the MENU button
E
F
/
C
I
/
to adjust picture
to return to the LEVELS Menu.
to see the OTHERS Menu.
to close the ADVANCED Menu.
OTHERS Menu
E
F
/
C
I
/
to select ON/OFF.
to return to the LEVELS Menu.
to return to the ADVANCED Menu.
to close the OTHERS Menu.
to select
to select:
13
ADVANCED Menu
OTHERS Menu
Advertisement
Table of Contents
