Home Accents Holiday 1005178730 Instruction Manual

Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always be
followed including the following:
READ AND FOLLOW ALL
a)
SAFETY INSTRUCTIONS.
b) Do not use this product outdoors. This product is for indoor use only.
The electrical rating 0.8 A 120 V 60 Hz.
c) This seasonal use product is not intended for permanent installation
or use.
d) Do not mount or place near gas or electric heaters, fireplace, candles
or other similar sources of heat.
e) Unplug the product when leaving the house, when retiring for the
night, or if left unattended.
f ) Do not use this product for other than its intended use.
g) Do not hang ornaments or other objects from cord, wire, or light
string.
h) Do not cover the productwith cloth, paper or any material not part of
the product when in use.
i) This product is equipped with push-in type lamps. Do not twist lamps.
j) This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse blows, unplug
the product from the outlet. Also unplug any additional strings or
products that may be attached to the product. Replace the fuse as per
the user servicing instructions (follow product marking for proper fuse
rating) and check the product. If the replacement fuse blows, a
short-circuit may be present and the product should be discarded.
k) Read and follow all instructions that are on the product or provided
with the product.
SAVE THESE INSTRUCTIONS.
l)
Use and Care Instructions
a) Before using or reusing. Inspect product carefully. Discard any
products that have cut, damaged, or frayed wire insulation or cords,
cracks in lampholders or enclosures, loose connections, or
exposed copper wire.
b) When storing the product, carefully remove the product from
wherever it placed, to avoid any undue strain or stress on the
product conductors, connections, and wires.
c) When not in use, store neatly in a cool, dry location protected from
sunlight.
CAUTION!
–
TREE FROM ITS POWER SOURCE BEFORE
ASSEMBLING OR DISASSEMBLING.
CAUTION
– To reduce the risk of electric shock, use only
a)
with the power-supply cord provided or with a cord set intended for
outdoor use.
b) Do not use a cracked, frayed, or damaged cord. Inspect the cord
periodically.
c) Do not abuse cord – Do not carry product by the cord or yank or pull it to
disconnect from the outlet.
d) Disconnect the product from the outlet when not in use. If
a branch of the tree falls off, reinstall it with a spare rivet.
ALWAYS UNPLUG YOUR
6.5 FT FESTIVE PINE WITH 250L LED COLOR
CHANGING 3 FUNCTIONS
SKU# 1005178730
Pre - Assembly
Package Contents
A. Tree top B. Tree center
Qty: 1
Qty: 1
D. Legs of Tree base
E. Power supply
Qty: 4
cord
Qty: 1
H. Rivet
Qty: 2
Assembly
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step 2. Insert and slide the legs upward into the slots of the base until firmly
secured. (Note: The base is already on the tree section (C)).
Assembling the tree
Please remove protective covers from the base of the pole for each tree
section before assembling.
Step 1. Carefully insert the middle section (B) of the tree into the
bottom section (C). (See Fig. 1)
Step 2. Insert the top section (A) into the middle section (B). (See Fig.
2)
Step 3. Insert the male connector of the middle section (B) into the
female connector of the top section (A) in right direction
properly and button on the connectors, the male connector of
the bottom section (C) into the female connector of the middle
section (B) in right direction properly and button on the
connectors, the male connector of the power supply cord into
the female connector of the bottom section (C) in right
direction properly and button on the connectors according to
the magnified drawing on Fig. 6). (See Fig.3,4,5,6)
C. Tree bottom
with base
Qty: 1
F. Replacement
bulb
Qty: 6
G. Fuse
Qty: 2