Home Accents Holiday TG90M3ACDL16 Quick Start Manual

TM
NEED HELP?
DO NOT RETURN TO STORE. Call: 1-877-527-0313
Form 8am to 5pm EST, Monday through Friday.

Safety Information

IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always
be followed, including the following:
READ AND FOLLOW ALL
a.
SAFETY INSTRUCTIONS.
b. Do not use seasonal products outdoors unless marked suitable for
indoor and outdoor use. When products are used in outdoor applications,
connect the product to a Ground Fault Circuit Interrupting (GFCI)
outlet. If one is not provided, contact a qualified electrician for proper
installation.
c. This seasonal product is not intended for permanent installation or use.
d. Do not mount or place the product near gas or electric heaters,
fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for the
night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire, burns,
personal injury and electric shock it should not be played with or
placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or light string.
k. Do not close doors or windows on the product or extensions cords as
this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any materi al that is not
a part of the product when in use.
m. The lamps of this product are not replaceable. Do not attempt to
change or modify the lamps.
n. Read and follow all instructions that are on the product or provide with
the product.
SAVE THESE INSTRUCTIONS
o.

Pre-Assembly

Package Contents

Part Description
A Tree top
B Tree center, Sticker 2
C Tree center, Sticker 1
D Tree stand

Assembly

Assembling the tree stand

Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand and lay the stand
Step 3. Slide the locking disk of the tree stand down until it

Assembling the tree

This tree assmebles with Quick Set® technology
---Set up and light up your tree in less than 10 minutes!
Step 1. Remove the protective caps from the tree bottom
Step 2. Continue by inserting the upper tree section(s) to
Step 3. Shape the branches to your preference by working
Step 4. Insert the adapter into the wall outlet. All your lights
Step 5. Shape the tree from the bottom to the top. Start
Step 6. When finished shaping the branches, slightly
Section 2
Section 1
Quantity
1
1
1
1
Model: TG90M3ACDL16
on the floor.
snaps into place.
and insert the pole into the tree stand.
the lower section(s) until inserting the tree top.
from the bottom to the top. When adjusting
branches, ensure that all wires are free of branch
hinges.
should now be lit.
with the branches farthest from the pole – fan out in
a star shape, and continue until the entire tree is
shaped.
Top view
upsweep all branch tips for a uniform look.
Tree top
100S
50S
50S
100S
100S
100S
100S
Christmas Tree
Sku # 1005 271 540
Side view
Do Not Tamper
Internal Parts
Open the
cap cover
Align both arrows
in a straight line
before sliding
down to insert
Adapter
To Be Plugged
Into Wall
Outlet
Foot Pedal
on/off Switch