Home Accents Holiday TG76M5311L08 Manual

TM
NEED HELP?
DO NOT RETURN TO STORE. Call: 1-877-527-0313
Form 8am to 5pm EST, Monday through Friday.
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should al ways
be followed, including the following:
READ AND FOLLOW ALL
a.
SAFETY INSTRUCTIONS.
b. Do not use seasonal products outdoors unless marked suitable
for indoor and outdoor use. When products are used in
outdoor applications, connect the product to a Ground Fault
Circuit Interrupting (GFCI) outlet. If one is not provided,
contact a qualified electrician for proper installation.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or electric
heaters, fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails,
or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for
the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire,
burns, personal injury and electric shock it should not be
played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or
light string.
k. Do not close doors or windows on the product or extensions
cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any materi al
that is not a part of the product when in use.
m. This product is equipped with push-in type lamps. Do not
twist lamps.
n. Read and follow all instructions that are on the productor
provide with the product.
SAVE THESE INSTRUCTIONS
o.
Pre-Assembly
Package Contents
Part Description
A Tree top
B Tree center, Sticker 2
C Tree center, Sticker 1
D Tree stand
Assembly
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand and lay the stand
Step 3. Slide the locking disk of the tree stand down until it
Assembling the tree
This tree assmebles with Quick Set® technology
---Set up and light up your tree in less than 10 minutes!
Step 1. Remove the protective caps from the tree bottom
Step 2. Continue by inserting the upper tree section(s) to
Step 3. Shape the branches to your preference by working
Step 4. Insert the adapter into the wall outlet. All your lights
Step 5. Shape the tree from the bottom to the top. Start
Step 6. When finished shaping the branches, slightly
upsweep all branch tips for a uniform look.
Section 2
Quantity
Section 1
1
1
1
1
Model: TG76M5311L08
on the floor.
snaps into place.
and insert the pole into the tree stand.
the lower section(s) until inserting the tree top.
from the bottom to the top. When adjusting
branches, ensure that all wires are free of branch
hinges.
should now be lit.
with the branches farthest from the pole – fan out in
a star shape, and continue until the entire tree is
shaped.
Top view
Tree top 100S
50S
50S
100S
100S
50S
100S
Christmas Tree
Sku # 1005 235 041
Side view
Do Not Tamper
Internal Parts
Open the
cap cover
Align both arrows
in a straight line
before sliding
down to insert
Adapter
To Be Plugged
Into Wall
Outlet
Foot Pedal
on/off Switch