Appliance Setup
Step 3: Verify System Information
1. Connect to the FSM-3500F appliance using VGA port or Console port.
2. Login as ' root ' user with password 'ProspectHills'.
3. Run get to check the available FortiSIEM commands.
4. Use the below commands to check the hardware information. After running each command, ensure that there are
no errors in the displayed output.
Command
get system status
diagnose hardware info
diagnose interface detail port0
5.
Step 4: Configure Network
1. On the hardware console, select Set Timezone and then press Enter .
2. Select your Location, and then press Enter .
3. Select your Country, and then press Enter .
4. Select your Timezone, and then press Enter .
5. Review your Timezone information, select 1 , and then press Enter .
6. When the Configuration screen reloads, select Login , and then press Enter .
7. Enter the default login credentials:
Login
Password
8. Run the vami_config_net script to configure the network.
/opt/vmware/share/vami/vami_config_net
9. When prompted, enter the information for these network components to configure the Static IP address: IP
Address , Netmask , Gateway , DNS Server (s).
The authenticated proxy server is not supported in this version of FortiSIEM.
Note:
10. Press Y to accept the network configuration settings.
11. Enter the Host name, and then press Enter .
Once the configuration is complete, the system reboots automatically.
FortiSIEM 5.4.0 3500F Hardware Configuration Guide
Fortinet Technologies Inc.
root
ProspectHills
Description
Displays system name, version and serial number.
Displays system hardware information like CPUs, Memory
and RAID information.
Displays interface status.
6