Appliance Setup
Follow the steps below to setup FSM-3500F appliance.
Step 1: Rack mount the FSM-3500F appliance
1. Follow the QuickStart Guide
2. Insert Hard Disks positions as shown below:
3. Connect FSM-3500F to the network by connecting an Ethernet cable to Port0.
Step 2: Power On the FSM-3500F appliance
1. Make sure the FSM-3500F device is connected to a Power outlet and an Ethernet cable is connected to Port0.
2. Power On the FSM-3500F device.
FortiSIEM 5.4.0 3500F Hardware Configuration Guide
Fortinet Technologies Inc.
here
to mount FSM-3500F into rack.
Before proceeding to the next step, connecting Ethernet cable to Port0 is required for
Network configuration.
FSM-3500F appliance does not have a default IP address. To connect to the GUI, an IP
address must be configured using the CLI (
Step 4
).
5