Table of Contents
Advertisement
UK
Instructions for transport at public roads:
Before transport at public roads, make sure that the attachment of the implement to the tractor, is in
accordance with the local rules and regulations in force (permitted total weight, permitted axel load,
transport width, lights and warning signs).
When driving at public roads, the tines must be folded towards the frame. This will reduce the width
of the machine substantially.
Front axel load
:
When the implement is attached and at maximum load, the tractors driving properties must be ensured.
Check that the front axel is sufficiently loaded. The front axel load must be at least 20% of the tractors
weight. Permitted axel load and total weight for the tractor must be respected.
NB! The driving, controlling and braking properties are affected by the attached implement.
Safety Instructions, regarding Hydraulic System
• The highest allowable pressure, is 225 bar.
• It is recommended to mark the hydraulic connections between the implement and tractor, to avoid
incorrect operation!
• When checking for hydraulic leeks, suitable safety gear must be used due to danger. (Safety,
goggles, gloves, etc.)
At high pressure, hydraulic oil can penetrate the skin and course serious injuries.
• Before any work at the hydraulic system, the implement must be lowered to solid ground. Pressure
must be relieved, engine stopped, and ignition key removed.
• Check the hydraulic hoses on a regular basis, however, every six months as a minimum due to any
cracks, wear and tear, etc. Replace any defective hoses immediately.
• Hydraulic hoses lasts for no more than 5 years.
New hydraulic hoses must be identical to the manufacturers specifications.
Several markings are located at your machine, which contains safety regulations and other instructions to
inform about correct operating.
Please read these instructions carefully, and make the driver aware about the markings and safety
regulations in this Operating Instructions. Keep the markings clean and readable. If they are not, they must
be replaced.
Grass-Combi 6,0m 2 and 3 bars
Markings on the machine
6
29-04-2020
Back to the table of contents
Advertisement
Table of Contents
