FCA US GRAND WAGONEER 2022 Owner's Manual page 79

SYNC BUTTON
Press the SYNC icon on the rear climate
control screen to turn the SYNC feature
on/off. SYNC is used to synchronize the
rear passenger temperature, mode, and
blower settings with the driver's temperature,
mode, and blower settings. The SYNC indicator will
illuminate when SYNC is on. Changing the front
driver climate settings will adjust the passenger
(front and rear) settings automatically. If the front
passenger or rear climate settings are adjusted
while SYNC is on, SYNC will automatically exit.
REAR BLOWER CONTROL
Rear Blower Control is used to regulate
the amount of air forced through the rear
climate system. There are several blower
speeds available. The speeds can be
selected using the buttons on the touchscreen.
Use the small blower icon (or blower icon with the
downward arrow) to reduce the blower setting, and
the large blower icon (or blower icon with the
upward arrow) to increase the blower setting.
Blower can also be selected by pressing the blower
bar area between the icons.
REAR MODE CONTROL
Two airflow distribution modes for the rear seat
passengers can be selected on/off from the front
climate screen by individually by pressing the icons
on the touchscreen for up to three combinations of
airflow. The icons on the screen will illuminate
when selected, and turn off when deselected.
The two airflow modes are:
Face (panel outlets)
Feet (floor outlets)
NOTE:
If Auto is selected, these icons will no longer be
available and the current mode selection will be
overwritten.
REAR CLIMATE CONTROL OFF
To turn the rear climate controls off,
press the OFF button on the touchscreen,
near the blower buttons.
GETTING TO KNOW YOUR VEHICLE
Rear Climate Control Description And
Functions
Rear Climate Touchscreen (If Equipped)
Rear Climate Buttons (If Equipped)
77
2