FCA US GRAND WAGONEER 2022 Owner's Manual page 117

Navigation
Push and release the left or right
button until the Navigation display icon/title is
highlighted in the instrument cluster display. Hold
OK to Start Route will display when no active route
is set. Hold OK to Cancel Route will display when
an active route is set.
Off Road
Push and release the up or down
button until the Off Road Menu icon/title is
highlighted. Push the left or right
button to scroll the submenus.
Terrain Status

Selec-Terrain Status

Air Suspension Status

Vehicle Dynamics

Wheel Articulation

Transfer Case Status

Steering Angle

Pitch And Roll

Vehicle Pitch

Vehicle Roll

Trailer Tow — If Equipped
arrow Push and release the up
button until the Trailer Tow Menu icon/title is
highlighted in the instrument cluster display. Push
and release the left
select Trailer Trip or Trailer Brake.
Trailer Trip will display the following:
Distance

arrow
NOTE:
Press and hold the OK button to reset all the infor-
arrow mation.
Trailer Brake will display the following:
Output

Type

Gain

Audio
Push and release the up
button until the Audio Menu icon/title is
highlighted in the instrument cluster display. This
menu will display the audio source information,
including the Song name, Artist name, and audio
source with an accompanying graphic.
GETTING TO KNOW YOUR INSTRUMENT PANEL
Messages
or down arrow Push and release the up
button until the Messages Menu item is
highlighted. This feature shows the number of
or right arrow button to stored warning messages. Pushing the left
or right
the stored messages are.
When no messages are present, main menu icon
will be a closed envelope.
Settings
NOTE:
If current theme is set to Digital, tachometer will
not display while in the Settings menu.
NOTE:
If your vehicle is equipped with Head-Up Display
(HUD), feature settings are available at any vehicle
speed
Screen Setup
or down arrow
Push and release the up
button until the Settings Menu icon/title is
highlighted in the instrument cluster display. Push
and release the OK button to enter the submenus
and follow the prompts on the screen as needed.
The Settings feature allows you to change what
information is displayed in the instrument cluster
as well as the location that information is
displayed.
or down arrow
arrow button will allow you to see what
page 117.
Ú
or down arrow
115
3