Table of Contents
Advertisement
2.2
Installing the SUN2000
When drilling holes, avoid the water pipes and power cables buried in the wall.
1. Install the mounting bracket.
•
M6x60 expansion bolts are delivered with the SUN2000. If the length and amount of the bolts
do not meet installation requirements, prepare M6 stainless steel expansion bolts by yourself.
•
Loosen the nuts, flat washers, and spring washers of the two expansion bolts below.
2. Install the SUN2000 on the mounting bracket.
NOTE
Prepare an anti-theft lock suitable for the lock hole diameter (Ф8 mm) by yourself. An outdoor
waterproof lock is recommended.
3
3. (Optional) Install an anti-
theft lock.
Advertisement
Table of Contents
