Product Features; Components Of The Appliance - CANGAROO MISTY User Manual

•Diffusion of cool mist
•Automatic switch-off if water tank is empty
•Suitable for rooms up to 25m
•Quiet during operation
•Included cleaning brush in the set
•Adjusting the mist level by the knob in the base
•Uses ultrasonic high-frequency technology to create the right humidity in the nursery
•The transducer is made of ceramics and titanium alloy to prolong the use of the product
•The humidifier operates normally, when the room temperature is between 5° and 40° Celsius, and the relative
humidity is minimum 50%.
•Use clean water with temperature lower than 40°. We recommend you to use filtered water, boiled or distilled
water. This will reduce the risk from sludge or scale build-up on the ceramic transducer.
•Clean regularly the tank with water and the mist tube, at least every 3 days. The ultrasonic transducer is
recommended to be cleaned each week.
•Change the water in the tank regularly. The water you use should always be fresh and should not remain the
tank for more than 2 days.

PRODUCT FEATURES

2

COMPONENTS OF THE APPLIANCE

INSTRUCTIONS FOR USE
1. Cover of the humidifier
А. Nozzle for the mist
2. Handle of the tank
3. Water tank
4. Bottom of the tank
5, 6, 7 – Components, which measure the water
quantity (Float)
8. Cover of the indicating light
9. Base
10. Indicating light
11. ON/ OFF button and adjusting the mist level
12. Potentiometer
13. Water level sensor
14. Pressure plate
15. Screw
16. Fan
17. Valve body
18. Sealing ring
19. Water tank cap
20. Spring
21. Valve plug
22. Plastic part
23. Sealing ring
24. Transducer
25. Screw
26. Power PCB
27. Supply (power) cord
28. Screw
29. Bottom cover
30 & 31. Screws
11