Brand Code Search - Audiovox RCRN03BR Owner's Manual

from on to off).
Note: If you accidentally press the
Reverse Key after the device changes its
state, press the
onds to see if your device changes state again.
4. Press the Stop Key to stop the process. The
Power Key should turn off.
light on the

Brand Code Search

References to Similar Task
Auto Code Search ............................................................................................................2
Direct Code Entry .............................................................................................................4
Manual Code Search .......................................................................................................5
The Brand Code Search goes through only the codes for one of the select brands listed in the ac-
companying code list. If your brand of device is listed, this search can be very quick and easy.
1. Turn on the device you want to program by
manually pressing the power button.
Forward Key . Wait 2 sec-
Reverse Key
SAT•CBL•STRM Key
Power Key
TV Key
2. Find your device's brand in the Brand Code list
section of the accompanying code list. Circle the
number for your brand and keep the list handy.
3. Press and hold the device key you want to pro-
gram. The POWER key illuminates.
4. While you're holding down the device key, use
your other hand to press and hold the remote's
Power Key at the same time. The light on the
Power Key will turn off.
DVD•VCR Key
Play Key
Forward Key
Stop Key