Download Print this page
D-Link DWA-X3000 Quick Installation Manual

D-Link DWA-X3000 Quick Installation Manual

Ax3000 wi-fi 6 pcie adapter with bluetooth 5.1
Hide thumbs Also See for DWA-X3000:

Advertisement

Quick Links

Quick Installation Guide
DWA-X3000
AX3000 Wi-Fi 6 PCIe Adapter with Bluetooth® 5.1
The DWA-X3000 supports both Wi-Fi 6 and Bluetooth 5.1. The Bluetooth function
is optional and not required for Wi-Fi 6 functionality.
INSTALLATION
NOTE: Before you begin, disable any built-in wireless and/or Ethernet adapters and verify the settings such as the wireless network
name (SSID) and security settings of the network(s) you want to connect to.
HARDWARE INSTALLATION
SOFTWARE INSTALLATION
PACKAGE CONTENTS
DWA-X3000 || AX3000 Wi-Fi 6 PCIe Adapter with Bluetooth® 5.1
2 x High Performance Antennas
Magnetized Antenna Base with 3 ft (1 m) RF Cable
Low Profile Bracket
Bluetooth® Header Cable
Quick Installation Guide
CD-ROM
SYSTEM REQUIREMENTS
An available PCIe X1 slot
An available F_USB port (For optional Bluetooth functionality -
not required for Wi-Fi 6)
Windows 10 (64-bit)
An 802.11ax or 802.11ac wireless network
CD-ROM Drive
1. Turn off your computer, unplug the power cord and open the
computer to access the motherboard.
2. Insert the DWA-X3000 into a PCIe X1 slot on the motherboard.
3. [Optional] For Bluetooth support, connect the Bluetooth
Header Cable to the DWA-X3000 and the other end to an
available F_USB connector on your motherboard.
4. Connect the antennas to the base. Then connect the base
cable to the two RP-SMA connectors on the DWA-X3000.
5. Close the computer case, plug the power cord back in and
power on the computer.
6. Follow the instructions in the Software Installation section to
install the device drivers.
1. Insert the CD into the CD-ROM drive. When the autorun screen
appears, click Install Wi-Fi Driver and follow the on-screen
instructions to complete the installation.
2. [Optional] For Bluetooth support, click Install Bluetooth
Driver and follow the on-screen instructions to complete the
installation.
3. Alternatively, download the drivers from our website
http://support.dlink.ca/DWA-X3000 (Canada)
http://support.dlink.com/DWA-X3000 (USA)

Advertisement

loading

Summary of Contents for D-Link DWA-X3000

  • Page 1 An available F_USB port (For optional Bluetooth functionality - not required for Wi-Fi 6) • Windows 10 (64-bit) The DWA-X3000 supports both Wi-Fi 6 and Bluetooth 5.1. The Bluetooth function • An 802.11ax or 802.11ac wireless network is optional and not required for Wi-Fi 6 functionality.
  • Page 2 (USA) Consult the dealer or an experienced radio technician for help. 4. Install the DWA-X3000 in a different PCIe X1 slot on your computer (if applicable). FCC Caution 5. Try restarting the computer or try installing the This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.