Technical Specifications - Global Test Supply DOUBLE VISION DDPM-40 Quick Start Manual

Dual display phasing voltmeter
Table of Contents

Advertisement

TECHNICAL SPECIFICATIONS

MODEL NUMBER: DDPM-40
ENVIRONMENTAL CONDITIONS
• Conditions - Indoor and outdoor use
• Altitude - Up to 6,566 ft. (2000M)
• Operating Temperature -20°F to +120°F (-29°C to +49°C)
• Humidity - 95% to 49°C (non-condensing)
• Pollution Degree - PD4
• Measurement Category IV – Classification Rating (CAT IV) – Product is intended
for use with test and measuring circuits connected to the circuits/wiring outside
of a building installation, including transmission lines.
• Overvoltage Category IV
• Enclosure Material - Supertough Nylon UL 94-HB
• Printed Circuit Boards - FR-4 UL94V-0
• IEC Protection Rating - IP64
DIMENSIONS:
• Length 14 in. (36cm), Width 4.6 in. (12cm), Height 4.1 in. (10cm)
• Ground Cord Length - 12' (3.6m) fully extended, 3.5' (1.7m) retracted
• Weight - (w/o probes): 2.25 lbs. (1.02kg) each unit
• Battery Life - 8 hours continuous use under normal operating conditions
• Battery - 9V alkaline 1604A, IEC 6LR61 or 9V lithium, ANSI-1604LC
• Digital Meter - Reads in kilovolts
• Voltage Range - 5V-25kV each unit line-to-ground.
Indicates up to 43kV line-to -line, AC 25-1000Hz or DC
• Phasing Frequency - 50/60Hz
• Auto-Ranging - No range selector switch
• Accuracy - Within 1% of reading +/- 3 counts
• Meter Resolution: 0.005 - 0.999 range with 1 Volt resolution
6
uality Products Online at:
1.00 - 9.99 range with 10 Volt resolution
10.0 - 25.0 range with 100 Volt resolution
GlobalTestSupply
www.
(line-to-ground & line-to-line measurements)
.com
sales@GlobalTestSupp

Advertisement

Table of Contents
loading

This manual is also suitable for:

Double vision ddvip-138

Table of Contents