Temperature Control Probe; Operating Instructions - Westinghouse WHSK01K Instruction Manual

Table of Contents

TEMPERATURE CONTROL PROBE

FEATURES AS FOLLOWS:

Trigger release for easy removal.

Temperature selector

Built-in thermostat

NOTE: The light on the control probe will illuminate and will remain on until the set

temperature is reached. It will then cycle on and off throughout cooking as the

temperature is maintained by the thermostat. On initial heating of the skillet, it is

recommended that the temperature be allowed to cycle (the light cycling on and off)

several times. This will help the cooking surface to adjust to a more accurate cooking

temperature.

TRIGGER RELEASE CONTROL PROBE

The probe is thermostatically controlled and incorporates an indicator light which

switches off automatically when the temperature selected has been reached and then

cycles on and off to indicate that the selected temperature is being maintained.

Before ´Ust use, the skillet must be cleaned. Ensure the temperature control

probe is not attached to the skillet during the cleaning process. Wash your

skillet and lid with hot water and mild detergent. Rinse with fresh water and dry

thoroughly. Your skillet is now ready for use.

Season the cooking surface by applying a thin coat of cooking oil and rub in with

paper toweling.

Insert the control probe into the inlet on the side of the skillet.

Plug the power cord into the power outlet and turn on.

Set the temperature control probe to the desired temperature setting.

WARNING: Do not place extremely cold / frozen foods or liquids into a hot skillet

as it may result in excessive steam, spitting and spattering causing personal injury.

Table of Contents