AERF WIRELESSBAND 2 OSE Instruction Manual

EN
IP55 2 yrs
100m 2 Ch
Battery

1. GENERAL

- Two channel wireless system communication for either optical, resistive or mechanical safety edges.

1.1 SAFETY INSTRUCTIONS

- Reaction time < 60ms. (according TÜV test report AV86368T Certificate nº M6A 0908000001 Rev. 01)
- A Relay test should be done before any operation in order to fulfill EN13849-1-2015 Cat2 PL-C.

2. TRANSMITTER AND RECEIVER TERMINAL CONNECTIONS

TRANSMITTER
RECEIVER

3. TRANSMITTER - REGULAR CONFIGURATION FOR OSE

TRANSMITTER
1
INPUT 1
See point 11.1 for other
transmitter connections.
KIT WIRELESSBAND 2 OSE
Instruction Manual
(KIT WIRELESSBAND 2 OSE)
7Tx
Output
2 3 4 5 6
COM 1 Inhibitor COM 2 INPUT 2 VCC
Optical Low Power Safety Edge
1
INPUT 1 COM 1
1 2 3
VCC1 VCC2
OUTPUT 1
~ -
~
+/
/
ACTIVATED BY
TRANSMITTER
12/24V
INPUT 1
AC/DC
SAFETY
OUTPUT SIGNAL GREEN
BROWN
5 VDC
GND / 0V WHITE
Safe configuration
x
SAFETY
Fullfil EN13849-1 Cat 2 PL-C
2 3 4 5 6
INHIBITOR COM 2 INPUT 2 VCC
4 5 6 7 8 9 10
TEST
OUTPUT 2
RELAY 1
ACTIVATED BY
TRANSMITTER
INPUT 2
Receiver options configuration
for Optical Safety Edge
Sleeping mode
Optical sensor power
in receiver (ON)
supply from receiver (ON)
ON
+ ON
1 2 3
1
Optical sensor power
supply from receiver (OFF)
Translation of the original instructions
RoHS
Non-Safe configuration
11 12
TEST RELAY 2 /
INHIBITOR
2 3 4 5
1 - 8