Usb/Sd Card Operation; Aux Operation - Champion ABB200 User Manual

*FOLDER+ MODE (CD/MP3/USB/SD)
1. If "FOLDER+" buttons is short pressed during PLAYBACK/PAUSE/STOP mode, it will go to the
next folder and display the folder number.
2. If "FOLDER+" buttons is long pressed during PLAYBACK/PAUSE/STOP mode, it will go to the
next 10 tracks and display the track number.
EN
*REPEAT MODE (REPEAT/REPEAT ALL/REPEAT OFF)
1. Press the "MODE" button one time during playback or pause mode, "REP" is displayed with
flashing, the current single track can be repeated.
2. Press the "MODE" button two times during playback or pause mode,
"REP FOLDER" is displayed, the current folder can be repeated.
3. Press the "MODE" button three times during playback or pause mode,
"REP" is displayed without flashing, all tracks can be repeated.
4, Press the "MODE" button four times during playback or pause mode,
"RANDOM" is displayed, repeating cancelled.
Program mode /CD/MP3/USB/SD*
Up to 20(CD)/99(MP3,WMA) tracks can be programmed for disc playback in any order.
1. Press the "MODE" button short time during stop mode, LCD display will show
P01 and flash.
2. Select a desired track by using the "SKIP-/SKIP+" buttons.
3. Press the "MODE" button to enter the track into setting.
4. LCD display changes P02.
5. Repeat 2~4 step, up to 20(CD)/99(MP3,WMA) tracks, the display
will show FUL when the pro grammed tracks arrive 20(CD)/99
(MP3,WMA).
* To complete programming and start playback, short press "PLAY/PAUSE" button, program play
back starts automatically.
*To terminate programming, short press "STOP" button twice to cancel the program mode.

USB/SD card operation

*DON'T have compact disc in CD compartment.
1. Set the "FUNCTION" selector to CD/USB position.
2. Insert a USB/SD Card to the USB jack or SD slot
3. The operation of PLAY/PAUSE, STOP, SKIP-, SKIP+, REPEAT and PROGRAM is the same as
CD/MP3.
4. Press "STOP" button long time changing USB and SD mode.
*Have compact disc in CD compartment.
1. Set the "FUNCTION" selector to CD/USB position.
2. Insert a USB/SD Card to the USB jack or SD slot
3. Press "STOP" button long time to change CD to USB and SD mode
4. The operation of PLAY/PAUSE, STOP, SKIP-, SKIP+, REPEAT and PROGRAM is the same as
CD/MP3.

AUX operation

1. Connect the output cable of any device into AUX jack (3.5mm) located the left side.
2. Set the "FUNCTION" selector to "AUX/OFF" position, adjust the "VOLUME" control to the
desired level reception and play from speaker.
5