Champion ABB200 User Manual page 5

Power operation
AC POWER
1. Before connecting the AC power cord, check that the operating voltage of your set is identical
with voltage of your local power supplied.
2. Connect one end of the AC power cord (supplied) to the AC socket located at the backside of your
unit.
3. Plug the other end into the wall outlet.
4. After connect the power source, press the "FUNCTION SELECTOR" to "CD/USB" or "RADIO"
start work, and the power indicator will be lit on.
5. If you do not want to use the unit, press the "FUNCTION SELECTOR" to "AUX/OFF" to stop and
power indicator will be lit off.
DC POWER
1. Open the battery compartment cover.
2. Insert 8 pieces UM-2 of "C" type batteries into the battery compartment. Be sure to insert battery's
polarity as shown in the diagram engraved on the battery compartment.
3. Place the battery compartment cover.
Notes:
1. The battery circuit is disconnected automatically when the AC cord is inserted to the AC INPUT
socket, then operate by AC. Remove all the batteries from battery compartment, when the unit is
no longer operated by battery.
2. Do not throw the exhausted batteries in the household refuse.
3. Hand over the old batteries to your dealer to public collecting points.
Compact disc operation
*Getting started
1. Set the "FUNCTION" selector to CD/USB position. Open the CD Cover with "CD OPEN handle".
Put the CD printed side up into the compartment and close the CD cover.
2. Focus search is performed, and the first number of tracks will be displayed at the same time play
ing automatically.
*SKIP MODE (CD/MP3/USB/SD)
1. During playback or pause mode, if "SKIP+" button is pressed one time, it will go to the next track
and display the track number and then continue the playback or pause. If "SKIP+" button is being
pressed long time, the current track will be fast forwarded.
2. During the playback or pause mode, if "SKIP-" button is pressed one time, it will l go to the previo
us track and display the track number and then continue the playback or pause. If "SKIP-" button is
being pressed long time, the current track will be fast rewound.
*STOP MODE
If "STOP" button is short pressed during playback or pause mode, the unit will go to stop mode and
display TOTAL NUMBER of tracks.
*PLAYBACK/PAUSE MODE(CD/MP3/USB/SD)
1. If "PLAY/PAUSE" button is short pressed during stop mode, the first track will be played and the
PLAY icon will be displayed.
2. If "PLAY/PAUSE" button is pressed during playback mode, the unit will go to pause mode and the
PLAY ( ) icon and number of track will be flashing.
EN
4