Appendix A Standards And Compliances; Declaration Of Conformity - ATTO Technology H308 Installation And Operation Manual

Appendix A Standards and Compliances

The equipment described in this manual generates and uses radio frequency energy. The Technical Specification
sheet for the ATTO ExpressSAS Host Adapter shows certifications for each model.
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment
and receiver
Canadian standards
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
European standards

Declaration of Conformity

This following statement applies to the ATTO ExpressSAS Host Adapter.
This device has been tested in the basic operating configuration and found to be compliant with
the following European Union standards: Application of Council Directive: 89/336/EEC
Standard(s) to which conformity is declared:
EN55024:2002; EN55022:2002 CLASS B
This Declaration will only be valid when this product is used in conjunction with other CE approved devices and
when the entire system is tested to the applicable CE standards and found to be compliant.
The ATTO ExpressSAS Host Adapter cards comply with Directive 2002/95/EC on the
Restriction of the Use of Hazardous Substances in Electrical and Electronic Equipment
(RoHS). Contact your ATTO representative regarding RoHS compliant products.
i ATTO Technology Inc. ATTO ExpressSAS Host Adapter Installation and Operation Manual
FCC standards: radio and television interference
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected
• Consult the dealer or an experienced radio/TV
technician for help