6 Service Mode
This unit is equipped with features of self diagnostic & doctor mode setting for checking the functions & reliability.
6.1.
Self Diagnostic Table
Item
Mode name
Self Diagnostic Mode
To enter into self diagnostic
checking
Error code information
System will perform a check on
any unusual/error code from the
memory
Delete Error code
To clear the stored in memory
(EEPROM IC)
Opecon version
To display model name & version
Model Name
Cold Start
To activate cold start upon next
power up.
(Backup data are initialized)
Description
Version display
PM250
_4HA
FL display
Example:
(Display 1)
Version display
(Display 2)
No Rom correction
14
Key operation
Step 1 : Select CD mode
(Ensure no disc is inserted).
Step 2 : Press and hold [
] follow by
[
-PAIRING] on main unit
for 2 second .
• To exit, press the [TA] on the main
unit or using the remote control.
• Unplug the AC cord.
Step 1 : In self diagnostic mode,
Press [STOP] on main unit.
• To exit, press the [TA] on the main
unit or using the remote control.
• Unplug the AC cord.
Step 1 :
In self diagnosis mode,
press and hold [OK] on
remote control for more than
5 second.
• To exit, press the [TA] on the main
unit or using the remote control.
• Unplug the AC cord.
Press [DISPLAY] button on the
remote control.
• To exit, press the [TA] on the main
unit or using the remote control.
• Unplug the AC cord.
Press [SETUP] button on the remote
control.
• To exit, press the [TA] on the main
unit or using the remote control.
• Unplug the AC cord.