ATN Night Star User Manual page 5

• Evaluate the monocular function by looking through it in a lit environment with the daylight
filter lens cap on. Never use in daylight without the daylight filter lens cap on.
• Never point the Night Star at a bright light source.
• Adverse atmospheric conditions such as fog, smog, or haze and a lack of ambient light
(moon or starlight) may diminish the effective viewing distance.
USING THE 3X TO 8X DOUBLER
Unscrew 35 mm lens off the body of the Night Star (make sure that the unit is turned off).
Screw the doubler into the body of the Night Star where the 35 mm lens was removed. Screw
the 35 mm lens or your 90 mm lens into the doubler.
NOTE: You can also add just the 90mm lens to a Night Star without a doubler.
NOTE: When attaching the doubler do not be afraid to use a little force.
USING THE CAMERA ADAPTER
To use your Night Star with a 35mm camera or camcorder you will need the following:
1) If you plan to use a camcorder, then your camcorder must have a MACRO feature. Most
modern camcorders today have a MACRO feature built-in.
2) If you plan to use a 35mm camera, you will need a MACRO lens. If you don't have one, we
advise that you contact your local camera store.
3) You may or may not need a STEP-UP or STEP-DOWN ring in order to adapt the camera
adapter to your lens.
NOTE: The camera adapter comes with 37mm and 52mm threads. If you need other sizes your
local camera store should be able to help.
• Remove the rubber eyecup from the Night Star
Your NightStar
Your Night Star
Night Star lens
Optional
Doubler
mount lens
Camera adapter
Set screws
(o p t i o n a l)
or any "C"
Doubler
(o p t i o n a l)
Video or 35mm
Camera
4