Specifications - ATN Night Star User Manual

Night vision monocular
Table of Contents

Advertisement

APPLICATION
The Night Star Night Vision Monocular is a complex opticoelectronic system for individual
use. The device consists of (see above figure) the objective lens assembly, eyepiece and
the body. The body contains a 1st Gen.+ image intensifier tube assembly with an integrated
high voltage power source and the three volt battery housing. When installing the battery one
should keep in mind that the polarity of the battery should coincide with the diagram on the
body next to the battery housing cap.
Objective lens protective cover (not shown) is intended to protect the objective lens from dust
and scratches. It also will act as a daylight filter, allowing you to test the scope in daylight or
other bright light situations. The pinhole in the center of the protective cover allows the user to
check the operation ability of the device in daylight conditions.
NOTE: Do not test the scope in daylight conditions even with the daylight filter/lens cap on for
more than ten (10) minutes.
The device is powered up by sliding the switch on the rear of the unit labeled "PWR". You may
notice a persistent green glow for up to five (5) minutes after you have turned the unit off. This
is normal for the 1st Gen. light intensifier tube.
FEATURES
• Great for hunting, camping, boating or surveillance
• Total darkness technology
• Automatic brightness control
• Built-in IR illuminator
• Manual focus
• Adjustable eyepiece
• High res. 1st Gen+ intensifier tube
• Rugged and versatile design
• Light weight and comfortable
• Water and dust resistant
• Single switch button operation
• Superb 1.5X lens system
• Optional Doubler & Lens allows 3X to 8X magnification
• Soft case
• Two years warranty (optional extended warranty)

SPECIFICATIONS

Magnification ....................... 1.5X (Optional 3X, 4X, 8X)
Intensifier tube ..................... 1st Gen.+; high res.
Lens System ........................ 35 mm; F1.2
Field of view ......................... 20°
Resolution ........................... 40lp/mm
Minimum light Req. .............. 5X10
Range of Focus.................... 1' to
Power Supply....................... 3 volt lithium
Battery Life .......................... 10-20 hours
Operating Temp. .................. -30°F to +110°F
Dimensions.......................... 137mm X 87mm X 43mm
Weight.................................. 9.5 oz
lux
-3
2

Advertisement

Table of Contents
loading

Table of Contents