Joney JYF-3001 Manual page 3

1. Fingerprint lock is a kind of hi-technical product, and its normal
operation and life span are directly influenced by the installation.
Therefore, we kindly suggested you to call in a professional to install it.
Please open pores, supporting pits, buckle and buckle pores
according to the indication of opening pore in the door plank. Pores
should be opened accurately and the lock should be installed
according to the indication strictly. If the lock cannot be opened
(smoothly) after installation, please contact with the local distributors
or our after-sales department to solve the problem.
2. If your house is sprucing up, it is suggested to uninstall the lock after
you exanimate the locks and to reinstall them after the sprucing up.
The aims are: 1. To avoid the lock appearance being damaged by
corrosives, and the wet paint on the door will influence the gearing of
the lock. 2. Ethyl alcohol, paint and other chemicals will be used when
we sprucing up the house, which will be volatized to accelerate to
damage the lock appearance and shorten its life span.
3. Before installation, please switch on all of the connecting wire and
load the batteries, and then press the initialized button to initialize the
lock and restore factory defaults.
4. When installing the lock, please do take the mechanical keys with you
so as to unlock it if the door is close before you finish the installation.
Important Tips
1