Table of Contents
Advertisement
Operation Instructions：
Initialization: long-press the switch of initialization on the circuit board and
1.
do not loosen your finger until you hear the voice prompt of "......has
cleared". And the initialization will be finished. At this moment there is not
any effective cards or fingerprints and the administrator password is
123456.
2.
Changing the administrator password: the default administrator
password is 123456. Press " * +
enter the programming mode. Next, press 8 +
administrator password ending with pressing
administrator password second time and end with pressing
will be finished when you hear a long sound. This administrator password
can also open the lock.
Adding a guest password: Press "* +
3.
to enter the programming mode. Next, press 7 +
user defined password number (from 01 to 99, should be registered in the
form). Then put in a guest password ending up with pressing the
repeat this again. The setting will be finished when you hear a long sound.
Adding a guest fingerprint: Press "* +
4.
" to enter the programming mode. Next, press 6 +
2-digit user defined number for the guest fingerprint (from 01 to 99, should
be registered in the form). Then put your finger on the fingerprint scanner
till you hear a long sound. The setting is complete.
Deleting all of the guest fingerprints and passwords: Press "* +
5.
administrator password +
1 +
and repeat it again. When the indicator light off, all of the guest
fingerprints and passwords are deleted without changing the administrator
password.
Deleting a guest fingerprint: Press "* +
6.
" to enter the programming mode. Next, press 4 +
2-digit fingerprint number you want to delete and end up with pressing
Repeat the 2-digit number +
Deleting a guest password: Press "* +
7.
+ administrator password +
+ administrator password +
" to enter the programming mode. Next, press
and the fingerprint is deleted.
and put in a new
. Then put in the
and put in a 2-digit
+ administrator password +
and put in a
+ administrator password +
and put in the
+ administrator password +
" to
. The setting
"
and
+
.
10
Advertisement
Table of Contents
