Euroflex monster IB 30 CLASSIC Instruction Manual page 26

Instructions for use IB 30 LUXE
Ironing station comes with a steam generating unit and a steam iron (3) with semi-professional soleplate
offering several advantages:
- unlike a "normal" iron, a semi-professional iron emits steam only at the tip. The great amount of
steam emitted "penetrates" easily in the several fabric layers well dampening the garments
- the back side of the soleplate immediately dry the linen
Thanks to the combination of steam and drying surface the time of ironing reduces remarkably.
Starting the appliance
- Insert the plug of the ironing board into the mains socket.
- Remove the silicone blocking device (24) (fastened to the safety cap) and place the iron on the iron-
rest mat (2).
- Turn the appliance on [mains switch (8). The orange indicator light (12) in the iron lights up and stays
on. The indicator light (12) comes off as soon as the soleplate reaches the set temperature. The iron
warms in 3-5 minutes. Pushing the on/off button the ironing board starts warming as well. A built-in
thermostat steadily controls the warming temperature of the ironing board. While warming-up the
appliance may emit some noises. It is a normal phenomenon, that should not alarm you.
- As soon as the "ready-steam" indicator light (10) lights up the pressure has been reached and the
steam generator is ready to use. The steam generator warms up in about 10 minutes. This time may
be reduced using lukewarm water.
Power indicator light
Ready steam light
End water light
(optional)
26
concentrated steam emission
drying surface
on / off button