Instructions For Use Ib 30 Classic - Euroflex monster IB 30 CLASSIC Instruction Manual

Instructions for use IB 30 CLASSIC

- For the suction function set the switch to the position "-"
- For the blowing function, set the switch to the position "="
Suction/Blowing function and warming-up of the ironing board
Suction Function
The suction absorbs the exceeding steam, no more necessary after ironing. The suction enables to hold
the garment firm on the ironing board and to eliminate the moisture. The garments are clean and dry,
ready to be put away.
The heating of the ironing surface prevent the board and consequently the garments from getting wet.
This functions prevent the formation of condensed water in the board.
Recommendation:
- With the suction function, light fabrics (silk, etc.) can be "fixed" on the ironing board, preventing them
from slipping away
- The suction function cool the fabric and "fix" the result of the ironing, allowing for perfect creases.
Blowing function
The blowing function enables to iron delicates or hard to iron items (trousers creases, pockets, seams,
hard to reach areas) on a cushion of air, avoiding the formation of false creases or the flattening of
seams.
After steam-ironing
- Turn off the appliance (on/off switch)
- Pull the plug out of the mains socket
- Let the appliance completely cool down
- Remove the iron cord support
Important: Store the appliance only when it has completely cooled down
suction function
24
blowing function